Fujifilm S5600 Manuel D’Utilisation
109
Viewing
Images
6
6.3 CONNECTING TO A PC
The “Connecting to a PC” section explains how to connect the camera to your PC using the USB
cable (mini-B) and describes the functions you can use once the camera and PC are connected.
cable (mini-B) and describes the functions you can use once the camera and PC are connected.
If the power cuts out during data transmission, the data will not be transmitted correctly. Always use the
AC power adapter when connecting the camera to a PC.
AC power adapter when connecting the camera to a PC.
Refer to Section 5 the first time you connect the camera to your PC.
Install the software first. Do not connect the camera to the PC before installing
all the software.
Install the software first. Do not connect the camera to the PC before installing
all the software.
This mode provides a simple way to read images from an xD-Picture Card and store images onto
an xD-Picture Card.
an xD-Picture Card.
CD-ROM
(Software for FinePix
CX
)
¶
DSC (Mass storage device) mode
6.3.1 Connecting to a PC
1
Insert an xD-Picture Card into the camera.
Gold
contact
area
Gold marking
1 Set the Power switch to “
w
” to turn the camera
on.
2 Select “
¶
” DSC in “
ò
” USB MODE in the
“
˜
” SET-UP menu (
➡P.90).
3 Set the Power switch to “OFF” to turn the
camera off.
2
DSC
DSC
NTSC
NTSC
NTSC
NTSC
SET
SET
SET
SET
SET
SET
ENGLISH
ENGLISH
1
2
3
4
0
1
0
2
0
3
Continued
108
●
!
Movies and images with CCD-RAW cannot be printed.
●
!
Images photographed with a camera other than FinePix
S5200 / FinePix S5600 may not be printed.
S5200 / FinePix S5600 may not be printed.
5
1 Press “d” or “c” to display the frame (file) for
which you want to specify PRINT settings.
2 Press “a” or “b” to set a value up to 99 as the
number of copies of the frame (file) to be printed.
For frames (files) that you do not want printed,
set the number of prints to 0 (zero).
For frames (files) that you do not want printed,
set the number of prints to 0 (zero).
To specify more PRINT settings, repeat steps 1
and 2.
3 Always press the “MENU/OK” button after the
and 2.
3 Always press the “MENU/OK” button after the
settings are completed.
YES
YES
CANCEL
CANCEL
FRAME
FRAME
TOTAL
TOTAL 00009
00009
SHEETS
SHEETS
01
01
0
1
0
2
0
3
6.2 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER —
PictBridge FUNCTION
Disconnecting the printer
1 Check that “PRINTING” is not displayed on the
camera’s screen.
2 Turn the camera off. Unplug the USB cable
(mini-B).
USB socket
(mini-B)
(mini-B)
6
“PRINT OK?” appears on the screen. Press the
“MENU/OK” button to begin printing.
“MENU/OK” button to begin printing.
7
Printer starts printing the specified number of
prints.
prints.
●
!
Press the “DISP/BACK” button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
●
!
Use the AC Power Adapter AC-5VX (sold separately) for the
connection (
connection (
➡P.104). If shutting off power supply during
communication, the files on the xD-Picture Card may be
damaged.
damaged.
PRINTING
PRINTING
CANCEL
CANCEL
1/9
SHEETS
SHEETS
CANCEL
CANCEL
PRINT OK?
PRINT OK?
TOTAL:
TOTAL:
9
SHEETS
SHEETS
YES
YES
CANCEL
CANCEL