Fujifilm Z1 Manuel D’Utilisation

90

91

1 Turn your PC on.
2 Connect the PC to the cradle using the USB

cable (mini-B).

Set the camera in the cradle.

Press the “POWER” button on the cradle to turn the
power on.

Continued

The “Connecting to a PC” section explains how to connect the camera to your PC using the USB
cable (mini-B) and describes the functions you can use once the camera and PC are connected.

If the power cuts out during data transmission, the data will not be transmitted correctly. Always use the
AC power adapter when connecting the camera to a PC.

Refer to Section 5 the first time you connect the camera to your PC.
Install the software first. Do not connect the camera to the PC before installing
all the software.

This mode provides a simple way to read images from an xD-Picture Card and store images onto
an xD-Picture Card.

CD-ROM

(Software for FinePix 

CX

)

¶

Insert an xD-Picture Card into the camera.

1 Press the “

w

” button for about 1 second to turn

the camera on in Playback mode.

2 Select “

¶

” DSC in “

ò

” USB MODE in the

“

˜

” SET-UP menu (

➡P.74).

3 Turn the camera off.

D S C

D S C

O K

O K

S E T

S E T

N T S C

N T S C

1

3

2

E N G L I S H

E N G L I S H

0

1

0

2

0

1

0

2

1 Plug the USB cable (mini-B) into the cradle USB

socket.

2 Plug the AC power adapter connector into the

“DC IN 5V” socket on the cradle and then plug
the AC power adapter into the power outlet.

●

Plug the camera securely and vertically into the cradle
connecting plug.