Fujifilm FinePix S304 Manuel D’Utilisation

(USB)socket

ＯＫ

ＢＡＣＫ

ＰＯＷＥＲＳＡＶＥ

ＤＡＴＥ／ＴＩＭＥ

ＵＳＢＭＯＤＥ

ＯＦＦ

ＳＥＴ

ＳＥＴ−ＵＰ

ＰＯＳＴＶＩＥＷ

ＰＯＳＴＶＩＥＷＯＮ

ＰＣＣＡＭ

1. Slide the Power switch to the side to turn

the camera on.

2. Set the “USB MODE” setting in the

“SET–UP” menu to “PC CAM” (

➡P.80, 81).

3. Slide the Power switch to the side to turn

the camera off.

✽You should use the AC power adapter (sold separately)

when the camera is connected to your PC (

➡P.95).

Loss of power during data transmission can prevent
successful data downloading.

4. Switch your PC on.
5. Use the special USB cable to connect the

camera to your computer.

6. Switch the camera on.

Always use the prescribed procedure when
disconnecting or switching off the camera
(

➡P.102).

✽Take care to ensure that the special USB cable is

connected the correct way around and that the plugs
are pushed fully into the connection sockets.

If you are using a Windows PC, the driver
settings are automatically specified when
installation ends. Just wait a few moments.

Digital

(USB) socket

Camera

DC IN 5V
socket

7.3 Use at PC-CAM mode

1. The “Found New Hardware” help message

appears in the bottom-right corner of your
screen. This message will close when the
settings are completed. No action is required.

✽ This step is not required for subsequent connections.

2. Specify the settings in the “AutoPlay” dialog

box.

■ When FinePixViewer is included in

the list of actions to perform

Select “Viewing images using FinePixViewer”
and then select the “Always do the selected
action” checkbox. (This checkbox may not be
shown in some cases.)
Click the [OK] button to launch FinePixViewer.

Windows XP

■ When FinePixViewer is not included

in the list of actions to perform

Select “Take no action” and then select the “Always
do the selected action” checkbox. (This checkbox
may not be shown in some cases.)
Click the [OK] button and launch FinePixViewer
manually.

3. A new removable disk icon appears in the

“My Computer” window.

The next time you connect the camera, the removable
disk drive icon and name change to the “FinePix” icon
and name.

TIP

Proceed to “Using FinePixViewer” on
page 104.