Fujifilm 16321107 Manuel D’Utilisation

“Sensitivity” refers to the camera’s sensitivity to light.  Choose from values between 200 and 6400, or 
select L (100), H (12800), or H (25600) for special situations.  Higher values can be used to reduce 
blur when lighting is poor, while lower values allow slower shutter speeds or wider apertures in bright 
light; note, however, that mottling may appear in pictures taken at high sensitivities, particularly at 
H (25600), while choosing L (100) reduces dynamic range.  Values of from ISO 200 to ISO 6400 are 
recommended in most situations.  If an AUTO option is selected, the camera will adjust sensitivity 
automatically in response to shooting conditions; the value in parentheses is the maximum sensitivity 
that will be selected when the subject is poorly lit.

 Press MENU/OK in shooting mode to display the shooting menu.  Press 

the command dial up or down to highlight 

N

 ISO and press MENU/

OK.

 

R At default settings, ISO options can also be displayed by pressing the Fn 

button.

 Press the command dial up or down to highlight the desired option 

and press MENU/OK to select.

 

R Sensitivity is not reset when the camera is turned off .

 

R L (100) is reset to ISO 200 and H (12800) and H (25600) are reset to ISO 6400 when RAW, FINE+RAW, or 

NORMAL+RAW is selected for image quality (

P 73).  For more information on the settings available with 

L (100), H (12800), and H (25600), see page 125.