Fujifilm 16404870 Manuel D’Utilisation

The Setup Menu

Z

Z POWER MANAGEMENT

Adjust power management settings.

Choose the length of time before the camera turns off  automatically when no operations are performed. 
Shorter times increase battery life; if OFF is selected, the camera must be turned off  manually. Note that in 
some situations the camera turns off  automatically even when OFF is selected.

Select ON for faster focus and to reduce the time needed to restart the camera after it has been turned off .

 

 

V

V SENSOR CLEANING

Remove dust from the camera image sensor.
•  OK: Clean sensor immediately (

P xi).

•  WHEN SWITCHED ON: If this option is selected, sensor cleaning will be performed when the camera turns on.
•  WHEN SWITCHED OFF: If this option is selected, sensor cleaning will be performed when the camera turns off  (sensor cleaning is 

not however performed if the camera turns off  in playback mode).

 

R Dust that can not be removed using sensor cleaning can be removed manually (

P

 112).

 B

 B FRAME NO.

New pictures are stored in image fi les named using a four-digit fi le number assigned by adding one to the 
last fi le number used.  The fi le number is displayed during playback as shown at right.  

B FRAME NO. con-

trols whether fi le numbering is reset to 0001 when a new memory card is inserted or the current memory 
card is formatted.

Numbering continues from the last fi le number used or the fi rst available fi le number, whichever is higher.  
Choose this option to reduce the number of pictures with duplicate fi le names.

Numbering is reset to 0001 after formatting or when a new memory card is inserted.

 

R If the frame number reaches 999-9999, the shutter release will be disabled (P 119).

 

R Selecting R RESET (P 88) sets B FRAME NO. to CONTINUOUS but does not reset the fi le number.

 

R Frame numbers for pictures taken with other cameras may diff er.