Fujifilm 7666 Manuel D’Utilisation
10
Inserting a Memory Card
■
■ Inserting a Memory Card
Inserting a Memory Card
1
Open the battery-chamber cover.
1 Note
Be sure the camera
is off before opening
the battery-chamber
cover.
Be sure the camera
is off before opening
the battery-chamber
cover.
2
Insert the memory card.
Holding the memory card in the orientation
shown below, slide it in until it clicks into
place at the back of the slot.
shown below, slide it in until it clicks into
place at the back of the slot.
Click
Be sure card is in correct orienta-
tion; do not insert at an angle or
use force.
tion; do not insert at an angle or
use force.
3
Close the battery-chamber cover.
Close the battery-
chamber cover and
slide it in until the
latch clicks into place.
chamber cover and
slide it in until the
latch clicks into place.
Removing Memory Cards
After confirming that the camera
is off, press the card in and then
release it slowly. The card can
now be removed by hand.
is off, press the card in and then
release it slowly. The card can
now be removed by hand.
3 Cautions
• The memory card may spring out if you remove
• The memory card may spring out if you remove
your finger immediately after pushing the card in.
• Memory cards may be warm to the touch after be-
ing removed from the camera. This is normal and
does not indicate a malfunction.
does not indicate a malfunction.