Fujifilm 40i Manuel D’Utilisation
101
100
●
To avoid damage caused by static electricity, always
use the special static-free case provided during
transportation or storage, or keep the SmartMedia in
a storage case if available.
use the special static-free case provided during
transportation or storage, or keep the SmartMedia in
a storage case if available.
●
Do not carry SmartMedia in locations such as a
trouser pocket. This could subject the SmartMedia to
excessive force when you sit down, thereby
damaging the SmartMedia.
trouser pocket. This could subject the SmartMedia to
excessive force when you sit down, thereby
damaging the SmartMedia.
●
The SmartMedia may feel warm when it is removed
from the camera after extended periods of picture
taking or image viewing. This is normal and does not
indicate a fault.
from the camera after extended periods of picture
taking or image viewing. This is normal and does not
indicate a fault.
●
Inserting a SmartMedia that is charged with static
electricity into your camera may result in a camera
malfunction. If this occurs, switch the camera off and
then on again.
electricity into your camera may result in a camera
malfunction. If this occurs, switch the camera off and
then on again.
●
Affix the label onto the designated area of the card.
Do not use third-party labels as this can lead to
problems when the card is inserted or removed.
Do not use third-party labels as this can lead to
problems when the card is inserted or removed.
●
When you attach the label, take care that it does not
cover any of the write-protect area.
cover any of the write-protect area.
■ Notes on Using SmartMedia with a PC
●
If you intend to take photos using a SmartMedia that
has been used on a PC, format the SmartMedia on
your camera.
has been used on a PC, format the SmartMedia on
your camera.
●
When you format a SmartMedia in the camera and
then shoot and record images, a directory (folder) is
automatically created. Image data is then recorded in
then shoot and record images, a directory (folder) is
automatically created. Image data is then recorded in
■ SmartMedia
The SmartMedia card is a new image recording
medium developed especially for use in digital
cameras. Each SmartMedia card contains a built-in
semiconductor memory chip (NAND flash memory)
which is used for storing digital image data.
Because the data is stored electronically, the stored
image data can be erased from the card and new data
recorded.
medium developed especially for use in digital
cameras. Each SmartMedia card contains a built-in
semiconductor memory chip (NAND flash memory)
which is used for storing digital image data.
Because the data is stored electronically, the stored
image data can be erased from the card and new data
recorded.
■ SmartMedia with ID
The SmartMedia with ID is a SmartMedia that has an
individually assigned identification number. The
SmartMedia with ID can be used with devices that use
ID numbers for copyright protection or other purposes.
This camera accepts SmartMedia with ID in the same
way as conventional SmartMedia for image capuring.
individually assigned identification number. The
SmartMedia with ID can be used with devices that use
ID numbers for copyright protection or other purposes.
This camera accepts SmartMedia with ID in the same
way as conventional SmartMedia for image capuring.
■ Storing Data
In the situations listed below, recorded data may be
erased (destroyed). Please note that Fuji Photo Film
Co., Ltd. accepts no responsibility whatsoever for the
loss (destruction) of recorded data.
✽When the SmartMedia is used incorrectly by the
erased (destroyed). Please note that Fuji Photo Film
Co., Ltd. accepts no responsibility whatsoever for the
loss (destruction) of recorded data.
✽When the SmartMedia is used incorrectly by the
owner or a third party
✽When the SmartMedia is exposed to static electricity
or electrical noise
✽When the SmartMedia cover is opened or the
SmartMedia removed and the camera is then
Notes on the SmartMedia
TM
switched off during data recording, during data
erasing (SmartMedia formatting) or during frame
advance when images are being played back.
erasing (SmartMedia formatting) or during frame
advance when images are being played back.
Back up important data onto another medium (MO
disk, floppy disk, hard disk, etc.).
disk, floppy disk, hard disk, etc.).
■ Notes on Handling SmartMedia
●
When inserting the card into the camera, hold the
SmartMedia straight as you push it in.
SmartMedia straight as you push it in.
●
Never remove the SmartMedia or switch the camera
off during data recording, during data erasing
(SmartMedia formatting) or during frame advance
when images are being played back. These actions
could result in damage to the SmartMedia.
off during data recording, during data erasing
(SmartMedia formatting) or during frame advance
when images are being played back. These actions
could result in damage to the SmartMedia.
●
Use only the SmartMedia specified for use with the
FinePix40i. The use of other SmartMedia could
damage the camera.
FinePix40i. The use of other SmartMedia could
damage the camera.
●
SmartMedia are precision electronic devices. Do not
bend, drop, or subject SmartMedia to excessive
shocks.
bend, drop, or subject SmartMedia to excessive
shocks.
●
Do not use or store SmartMedia in environments
likely to be affected by strong static electricity or
electrical noise.
likely to be affected by strong static electricity or
electrical noise.
●
Do not use or store SmartMedia in very hot, humid or
corrosive environments.
corrosive environments.
●
Take care not to touch the SmartMedia’s contact area
or allow the area to become soiled. Use a dry lint-free
cloth to wipe away any soiling that does occur.
or allow the area to become soiled. Use a dry lint-free
cloth to wipe away any soiling that does occur.
■
Specifications
Type
Image memory card for digital cameras
(SmartMedia)
(SmartMedia)
Operating voltage
3.3V
Operating conditions Temperature:
0
°C to + 40°C (+ 32°F to + 104°F)
Humidity:
80% or less (condensation free)
80% or less (condensation free)
Dimensions
37 mm
× 45 mm × 0.76 mm
(1.45 in.
× 1.77 in. × 0.03 in.) (W × H × D)
this directory.
●
Do not change or delete the directory (folder) names
or file names on the SmartMedia from your PC as this
will make it impossible to use the SmartMedia in your
camera.
or file names on the SmartMedia from your PC as this
will make it impossible to use the SmartMedia in your
camera.
●
Always use the camera to erase image data on a
SmartMedia.
SmartMedia.
●
To edit image data, copy the image data to the
computer’s hard disk and then edit the copied data.
computer’s hard disk and then edit the copied data.