Fujifilm 4900 Manuel D’Utilisation
71
3
70
This mode can be selected in the “
5
•
7
•
9
•
4
”
photography modes.
Set this setting to “ON” when you are using an
external flash.
Set this setting to “ON” when you are using an
external flash.
●
Synchronization speed :
Up to 1/1000 sec.
➀
Close the built-in flash.
➁
Mount the external flash on the camera’s hot
shoe.
shoe.
●
!
Built-in and external flash units cannot be used at
the same time.
the same time.
1
2
Select “
5
•
7
•
9
” (
4
” (
However, the use of “
9
” or “
4
” mode is
recommended.
MODE
SELECT
F
ISO
mm
AUTO
3
4
I
USING AN EXTERNAL FLASH
PHOTOGRAPHY MENU
●
➀
●
➁
◆
Compatible Flash Units
◆
Flash units that can be used with this camera
must meet the following 3 conditions :
must meet the following 3 conditions :
●
The aperture can be set.
●
External flash synchronization can be used.
●
The ISO sensitivity can be set.
When you are using an external flash, always
specify a fixed aperture setting.
specify a fixed aperture setting.
External Flash Settings
For external flash, refer to the user’s manual for
the flash and specify the settings as described
below.
the flash and specify the settings as described
below.
●
Match the settings to the camera aperture
setting.
In “
setting.
In “
5
” or “
7
” mode, match the settings to the
aperture measured by the camera.
●
the setting on the camera.
●
Select External Flash mode (TTL mode cannot
be used).
be used).
●
!
●
!
Flash photography cannot be used when continuous
shooting (
shooting (
selected.