Fujifilm 4900 Manuel D’Utilisation
103
5
FRAME NO. MEMORY
102
AUTO POWER SAVE SETTING
Once you enable this function, the monitor is
temporarily switched off to reduce power
consumption (Sleep mode) if the camera is not
used for about 15 seconds. If the camera is then
left unused for a further time (2 or 5 minutes), it
is automatically switched off. Use this function
when you want to get the maximum possible
running time from the battery.
temporarily switched off to reduce power
consumption (Sleep mode) if the camera is not
used for about 15 seconds. If the camera is then
left unused for a further time (2 or 5 minutes), it
is automatically switched off. Use this function
when you want to get the maximum possible
running time from the battery.
When the camera is in sleep mode, pressing the
shutter button down halfway brings the camera
back to full operational mode. This is a useful
feature as it allows you to take pictures more
quickly than switching the camera off and then
on again.
shutter button down halfway brings the camera
back to full operational mode. This is a useful
feature as it allows you to take pictures more
quickly than switching the camera off and then
on again.
●
!
Camera operation can also be restored by pressing
other buttons. (Only those buttons that are enabled
in the respective mode can be used.)
other buttons. (Only those buttons that are enabled
in the respective mode can be used.)
A
A
B
B
RENEW
CONT
Formatted SmartMedia used for both A and B.
You can check the file number by viewing the
image. The last 4 digits of the 7-digit number in
the top right corner of the screen are the file
numbers, while the first 3 digits show the
directory number.
image. The last 4 digits of the 7-digit number in
the top right corner of the screen are the file
numbers, while the first 3 digits show the
directory number.
Setting this function to “CONT” makes file
management easier as it ensures that file names
are not duplicated when images are downloaded
to a PC.
RENEW : Pictures are stored on each SmartMedia
management easier as it ensures that file names
are not duplicated when images are downloaded
to a PC.
RENEW : Pictures are stored on each SmartMedia
beginning with a file number “0001”.
CONT
: Pictures are stored beginning from the
highest file number stored on the last
SmartMedia used.
SmartMedia used.
●
!
If the SmartMedia already contains image files with
file numbers higher than the highest file number on
the last SmartMedia, images are stored beginning
from the highest file number on the current
SmartMedia.
file numbers higher than the highest file number on
the last SmartMedia, images are stored beginning
from the highest file number on the current
SmartMedia.
●
!
When you change the SmartMedia, always switch
the camera off before you open the SmartMedia slot
cover. If you open the slot cover without switching
the camera off, the frame number memory will not
function.
the camera off before you open the SmartMedia slot
cover. If you open the slot cover without switching
the camera off, the frame number memory will not
function.
●
!
File numbers run from 0001 to 9999. Once 9999 is
exceeded, the directory number goes up by 1. The
maximum number is 999-9999.
exceeded, the directory number goes up by 1. The
maximum number is 999-9999.
●
!
If you switch the Frame NO. Memory function off, the
highest file number stored by the function is reset.
highest file number stored by the function is reset.
●
!
The displayed frame number may differ for images
photographed on other cameras.
photographed on other cameras.
●
!
Auto Power Save is disabled during automatic
playback and when a USB connection is being used.
playback and when a USB connection is being used.
The Sleep function does not operate in
Playback mode, but the camera is
automatically switched off if it is left unused
for some time (2 or 5 minutes).
Playback mode, but the camera is
automatically switched off if it is left unused
for some time (2 or 5 minutes).