Fujifilm 6900 Zoom Manuel D’Utilisation
106
DISCONNECTING THE CAMERA FROM YOUR COMPUTER
●
!
Do not remove the SmartMedia or disconnect the
USB cable without following the removal/
disconnection procedure described above.
USB cable without following the removal/
disconnection procedure described above.
Always take the following steps before
disconnecting the camera from your computer:
disconnecting the camera from your computer:
➀
Check that the indicator lamp is green (the
camera is not exchanging data with the
computer).
camera is not exchanging data with the
computer).
➁
Select the correct procedure below for the
operating system used on your computer.
Then proceed to step
operating system used on your computer.
Then proceed to step
➂
on the right side of
this page.
●
Windows 98
Check that the indicator lamp is green.
Check that the indicator lamp is green.
●
Windows Me/2000 Professional
Exit “FinePixViewer”. Then click the Eject
icon in the taskbar and eject the media.
Check that the “REMOVE OK” message is
displayed.
Exit “FinePixViewer”. Then click the Eject
icon in the taskbar and eject the media.
Check that the “REMOVE OK” message is
displayed.
●
Macintosh
Quit “FinePixViewer”. Drag the “Removable
Drive” icon to the Trash and check that
“REMOVE OK” is displayed on the camera’s
screen.
Quit “FinePixViewer”. Drag the “Removable
Drive” icon to the Trash and check that
“REMOVE OK” is displayed on the camera’s
screen.
➂
Switch the camera off.
➃
Disconnect the special USB cable from the
camera.
camera.
●
➂
●
➃