Fujifilm A403 Manuel D’Utilisation

 

Always use the prescribed procedure when
disconnecting or switching off the camera
(

➡P.90).

If you are using a Windows PC, the driver settings
are specified automatically when installation is
completed. No further action is required.

✽On Windows XP and Mac OS X, you must specify the

automatic launch settings the first time you connect
the camera to your computer.

✽Take care to ensure that the special USB cable is

connected the correct way around and that the plugs
are pushed fully into the connection sockets.

7.2 Use at DSC mode

✽ Sold separately

7.1 Using the optional AC Power adapter

Always use a FUJIFILM AC Power Adapter AC-3V
(

➡P.102).

Use the AC power adapter to avoid losing power
at inconvenient times, such as when you are
downloading photographed images to your
computer. Using the AC power adapter also
allows you to take pictures and play back images
without worrying about depleting the batteries.

✽See P.107 for notes on using the AC power adapter.

✽Only connect or disconnect the AC power adapter

when the camera is switched off.

Connecting or disconnecting the AC power adapter
while the camera is switched on temporarily
interrupts the power supply to the camera, so that
images or movies being shot at the time are not
recorded. Failing to switch the camera off first can
also result in damage to the xD-Picture Card or
malfunctions during PC connection.

Check that the camera is switched off. Plug the
AC power adapter connector into the “DC IN 3V”
socket and then plug the AC power adapter into
the power outlet.

✽The socket-outlet shall be installed near the equipment

and shall be easily accessible.

✽The shape of the plug and socket-outlet depends on

the country of use.

Connecting the AC power adapter does not
allow you to charge the Ni-MH batteries. Use the
optional charger (

➡P.102) to charge the Ni-MH

batteries.

✽ Sold separately