Fujifilm 16408967 Manuel D’Utilisation
7
Be
fo
re Y
ou B
eg
eg
in
Introduction
The Electronic Viewfinder (EVF)
The electronic viewfinder provides the same information as the monitor, and can be
used when bright lighting conditions make the display in the monitor difficult to see.
Press EVF/LCD button to select from the monitor or electric view finder mode.
used when bright lighting conditions make the display in the monitor difficult to see.
Press EVF/LCD button to select from the monitor or electric view finder mode.
LCD
EVF
Bright Ambient Lighting
Reflections and glare caused by bright ambient lighting may make it hard to see the display in the monitor,
particularly when the camera is used outdoors. This can be addressed by holding the EVF/LCD button to trigger
outdoor mode. Outdoor mode can also be enabled using the T MONITOR SUNLIGHT MODE option in the
setup menu (P 101).
particularly when the camera is used outdoors. This can be addressed by holding the EVF/LCD button to trigger
outdoor mode. Outdoor mode can also be enabled using the T MONITOR SUNLIGHT MODE option in the
setup menu (P 101).
Diopter adjustment control
The camera is equipped with diopter adjustment to accommodate individ-
ual differences in vision. Slide the diopter adjustment control up and down
until the viewfinder display is in sharp focus.
ual differences in vision. Slide the diopter adjustment control up and down
until the viewfinder display is in sharp focus.
3
Strong sunlight focused through the viewfinder may damage the panel of electronic viewfinder (EVF). Do not
aim the electronic viewfinder at the sun.
aim the electronic viewfinder at the sun.