Fujifilm BL00710-201(1) Manuel D’Utilisation

121

Continued Q

DC 3.7V

740 mAh

Operating temperature 0°C to +40°C (+32°F to +104°F)

31 mm × 39.4 mm × 5.7 mm (1.2 in. 
× 1.6 in. × 0.2 in.) (W × H × D)

Approx. 15 g (0.5 oz.)

110-240 V AC, 50/60 Hz

9.0 VA (100 V)
10.8 VA (240 V)

4.2 V DC, 550 mA

Rechargeable Battery NP-45

Approx. 100 minutes

Wall type: 101.7 mm × 56 mm × 20 
mm (4.0 in. × 2.2 in. × 0.8 in.) (L × W 
× D)
Cord type: 85 mm × 54 mm × 20 mm 
(3.3 in. × 2.1 in. × 0.8 in.) (L × W × D)

Wall type: Approx. 66 g (2.3 oz.) 
(excluding batteries)
Cord type: Approx. 56 g (2.0 oz.) 
(excluding batteries)

0°C to + 40°C(+ 32°F to + 104°F)

Use with the following power supply cord set:
Cord: UL Listed, Type SPT-2, No.18 AWG, rated 300V, 
10A, minimum 4 ft (1.2m), maximum 10 ft (3m) long.
One end terminates in a molded-on, parallel-blade, (non-
polarized) attachment plug with a 7A, 125V (NEMA 1-
15P) configuration.
• The battery and battery charger themselves will 

become warm due to the power stored inside them. This 
is normal and does not indicate a fault. Wherever 
possible, use the battery charger in a well-ventilated 
location.

• There may be vibration noises from inside the battery 

charger during use. This is normal and does not indicate 
a fault. 

• Do not use the battery charger to charge batteries other 

than rechargeable battery NP-45.

• The battery charger could cause interference if placed 

close to a radio during charging. In this event, move the 
radio and charger further apart.

• Do not leave the battery charger in the following types 

of locations:
• Extremely humidity or high temperatures, such as 

close to a heating appliance or in direct sunlight

• Places with strong vibration
• In very dusty places

• The battery charger accepts input voltages of 110-240 

V AC at 50 or 60 Hz and can be used all over the world. 
However, the shape of the plug and socket-outlet 
depends on the country of use. Consult your travel 
agent for details.