Fujifilm A120 Manuel D’Utilisation
47
Settings
4
46
When the camera is in Sleep mode, pressing “a”,
“b”, “d” or “c” wakes the camera up. This is
useful since the camera can be ready to take
pictures instantly. Pressing also the Shutter button
wakes the camera up.
“b”, “d” or “c” wakes the camera up. This is
useful since the camera can be ready to take
pictures instantly. Pressing also the Shutter button
wakes the camera up.
●
!
Pressing any other button as well as “a”, “b”, “d” and “c”
wakes the camera up.
wakes the camera up.
ＰＯＷＥＲ ＳＡＶＥ
ＰＯＷＥＲ ＳＡＶＥ
２ ＭＩＮ
２ ＭＩＮ
ＦＯＲＭＡＴ
ＦＯＲＭＡＴ
: ＯＫ
ＯＫ
ＯＮ
ＯＮ
ＬＯＷ
ＬＯＷ
ＩＭＡＧＥ ＤＩＳＰ．
ＩＭＡＧＥ ＤＩＳＰ． :
ＢＥＥＰ
ＢＥＥＰ
:
2
3
1
4
ＳＥＴ−ＵＰ
ＳＥＴ−ＵＰ
ＳＥＴ
ＳＥＴ
ＣＡＮＣＥＬ
ＣＡＮＣＥＬ
When this function is enabled, the screen
temporarily turns off (Sleep mode) and the
viewfinder lamp (green) blinks at 1-second intervals
to save power if the camera is not used for 30
seconds. If the camera remains unused for an
additional interval (2 or 5 minutes), it is turned off.
Use this function when you want to get the maximum
possible running time from your batteries.
temporarily turns off (Sleep mode) and the
viewfinder lamp (green) blinks at 1-second intervals
to save power if the camera is not used for 30
seconds. If the camera remains unused for an
additional interval (2 or 5 minutes), it is turned off.
Use this function when you want to get the maximum
possible running time from your batteries.
●
!
The Power save setting is disabled during automatic
playback, during rechargeable batteries discharging and
when a USB connection is being used.
playback, during rechargeable batteries discharging and
when a USB connection is being used.
POWER SAVE SETTING
The Sleep function does not operate in SET-UP or Playback mode, but the camera will turn off if it
is left unused for a set some time (2 or 5 minutes).
is left unused for a set some time (2 or 5 minutes).
◆
To restore power to the camera
◆
To take pictures, briefly close and then re-open the
lens cover. To play back images, close the lens cover
then hold down “Playback” button for approx. 1
second.
lens cover. To play back images, close the lens cover
then hold down “Playback” button for approx. 1
second.
ON
OFF
SET-UP
■ SET-UP menu options
IMAGE DISP.
1
2
3
4
ON/OFF
ON
Specifies whether an image checking screen (photography result)
appears after taking a picture.
The image appears for a few moments and then recorded.
appears after taking a picture.
The image appears for a few moments and then recorded.
POWER SAVE
2 MIN/5 MIN
2 MIN
Specifies whether the LCD monitor turns off to conserve power
when the camera is not used. See P.47 for details.
when the camera is not used. See P.47 for details.
FORMAT
OK
–
Erases all files. See P.47 for details.
§ BEEP
LOW/HIGH/OFF
LOW
Sets the volume of the tone emitted when the camera controls
are used.
are used.
DATE/TIME
SET
–
Corrects the date or time. See P.14 for details.
TIME
DIFFERENCE
DIFFERENCE
SET
–
Specifies the time difference settings. See P.48 for details.
qLCD
ON/OFF
ON
Specifies whether the LCD monitor is ON or OFF when the
camera is turned on in Photography mode.
camera is turned on in Photography mode.
FRAME NO.
CONT./RENEW
CONT.
Specifies whether frame numbers are assigned consecutively
from previous numbers or begin again. See P.49 for details.
from previous numbers or begin again. See P.49 for details.
USB MODE
¶/qWEB/
¢
¶
Selects the function when the camera is connected to a computer
or a printer. See P.58 for details.
or a printer. See P.58 for details.
ENGLISH
Specifies the language used for LCD monitor display.
VIDEO SYSTEM
NTSC/PAL
–
Specifies whether video output is set to NTSC or PAL.
qRESET
OK
–
Resets all the camera settings (other than the DATE/TIME, TIME
DIFFERENCE, LANG. and VIDEO SYSTEM) to the factory
default values set at shipment. A confirmation message appears
when you press “c”. To reset the camera settings, press the
“MENU/OK” button again.
DIFFERENCE, LANG. and VIDEO SYSTEM) to the factory
default values set at shipment. A confirmation message appears
when you press “c”. To reset the camera settings, press the
“MENU/OK” button again.
DISCHARGE
OK
–
Discharges rechargeable batteries. See P.72 for details.
Settings
Display
Factory default
Explanation
FORMAT
Formatting erases all the frames (files).
Initialize the xD-Picture Card for use in the
camera.
Back up important frames (files) onto your
computer or another media.
1 Press “d” or “c” to select “OK”.
2 Pressing the “MENU/OK” button erases all the
Initialize the xD-Picture Card for use in the
camera.
Back up important frames (files) onto your
computer or another media.
1 Press “d” or “c” to select “OK”.
2 Pressing the “MENU/OK” button erases all the
frames (files) and initializes the xD-Picture
Card.
Card.
Formatting erases protected files also.
ＦＯＲＭＡＴ
ＦＯＲＭＡＴ
ＦＯＲＭＡＴ
ＦＯＲＭＡＴ ＯＫ？
ＯＫ？
ＥＲＡＳＥ
ＥＲＡＳＥ ＡＬＬ
ＡＬＬ ＤＡＴＡ
ＤＡＴＡ
ＯＫ
ＯＫ
ＣＡＮＣＥＬ
ＣＡＮＣＥＬ
ＳＥＴ
ＳＥＴ
●
!
If “
å
”, “
˚
”, “
ƒ
” or
“
©
” appears, see P.74 for information
before formatting the xD-Picture Card.