Sony DSC-P1 Manuel
Getting
sta
rted
9
Charging the battery pack
You cannot charge the battery pack while your camera is turned on. Be sure to turn
off your camera before charging.
off your camera before charging.
After charging
Remove the AC power adaptor.
Battery remaining indicator
The LCD screen on the camera shows the remaining time for which you can still
record or play back images.
This indication may not be entirely accurate depending on the conditions of use and
the operating environment.
Charging at a room temperature of 50°F to 86°F (10°C to 30°C) is recommended.
record or play back images.
This indication may not be entirely accurate depending on the conditions of use and
the operating environment.
Charging at a room temperature of 50°F to 86°F (10°C to 30°C) is recommended.
1
Insert the battery pack into your camera.
2
Open the jack cover and connect the DC connecting cable to the
DC IN jack of your camera with the
DC IN jack of your camera with the
v
mark facing up.
3
Connect the power cord (mains lead) to the AC power adaptor and
then to a wall outlet (mains).
then to a wall outlet (mains).
The battery indicator in the display window flashes when charging begins.
When the battery indicator stops flashing,
When the battery indicator stops flashing,
normal charge
is completed. For
full charge
, which allows you to use the battery longer than usual, leave the
battery pack inserted for about one hour after normal charge is completed until
the battery remaining indicator and “FULL” is displayed alternately in the
display window.
the battery remaining indicator and “FULL” is displayed alternately in the
display window.
AC-LS1A AC power adaptor
Jack cover
To the wall outlet (mains)
Battery pack (S series)
Power cord
(mains lead)