Better Light 7 Manuel D’Utilisation

84

First, position the camera insert face up on a clean, stable surface. Use the Clean/Park menu 

option to move the CCD to its cleaning position. The camera may remain turned on during the 
cleaning procedure.

We recommend the use of e-wipe™ 
cleaning pads for the best results with 
the least effort.
1. Tear open the foil package. With-
draw the e-wipe by holding one end 
only. Do not touch the other end of 
the pad. Do not unfold the pad. Work 
quickly after opening the package or 
the methanol in the pad will absorb 
water vapor from the air and leave 

water spots when used.
2. Tuck the untouched end of the e-wipe under the insert 
opening at one end of the CCD. Lay your thumb sideways 
across the pad as shown. 
3. In a single continuous motion, wipe the pad along the 
length of the CCD cover glass. Use the side of the thumb 
to apply very gentle pressure on the pad as the cover glass is 
wiped.
4. Using one continuous J-stroke motion, slide the pad side-
ways off the CCD cover glass. The solvent residue evaporates 
cleanly almost immediately, do not dry the CCD glass. Do 
not re-use the e-wipe pad.
After inspecting the CCD cover glass for any remaining 
residue or dust particles, use the Park command to move the 
CCD back to its parked position.