Hitachi hdc-401ex Manuel D’Utilisation
64
63
■ Setting the Date Imprint
You can imprint the captured images with the date on which they were taken.
When a still image is captured with the Date Imprint function set to ON, the
date is imprinted on the JPEG file of the captured image (in the lower-left
corner). Note that this is different from printing the date information of a file
based on a printer setting, etc.
date is imprinted on the JPEG file of the captured image (in the lower-left
corner). Note that this is different from printing the date information of a file
based on a printer setting, etc.
Press MENU to display the Capture Menu
screen.
screen.
1
In the Capture Menu screen, select Date
Imprint using【
Imprint using【
M】
【
N】and then select the
ON/OFF mode using【
O】
【
P】.
2
Capture Menu
Date Imprint
Setup
Exit
Setup
Exit
Off
OK：
Set
O/P：
Change
Capture Menu
Date Imprint
Setup
Exit
Setup
Exit
On
OK：
Set
O/P：
Change
3
●
The date-imprint setting selected here is retained even after the power is
turned off. However, Setting to the Default
turned off. However, Setting to the Default
returns the setting to
OFF.
●
The date is imprinted in white text, which may be difficult to see against a
white background.
white background.
●
Even if the Date Imprint function is set to ON, the date won
,
t be imprinted in
the digital zoom mode.
P25
■ Using the Self-Timer
You can capture images using the camera
,
s self-timer function
(which can be set to 10 seconds or 5 seconds).
When the self-timer is used, keep the camera from moving by setting it on a
tripod, etc.
When the self-timer is used, keep the camera from moving by setting it on a
tripod, etc.
In the Still Image Capture mode, press the
self-timer
self-timer
button（
【
O】）repeatedly to
select the desired timer period.
：The timer period is set to 10 seconds.
：The timer period is set to 5 seconds.
：The timer period is set to 5 seconds.
An icon corresponding to the selected timer period is
displayed on the LCD monitor.
displayed on the LCD monitor.
1
Set the layout and press the shutter.
●
The self-timer lamp (red) starts blinking and the
number shown on the LCD monitor begins
decreasing, indicating that the self-timer has
started. When the selected timer period elapses,
the camera will emit a“bleep”sound to indicate
that the image has been captured.
number shown on the LCD monitor begins
decreasing, indicating that the self-timer has
started. When the selected timer period elapses,
the camera will emit a“bleep”sound to indicate
that the image has been captured.
2
●
To stop the self-timer, press the self-timer
button（
【
O】）.
●
The image capture settings (image size, image quality, white balance, EV, etc.)
are also effective when the self-timer is used.
are also effective when the self-timer is used.
●
The self-timer function is canceled once the image is captured. To take another
image using the self-timer, set the self-timer again.
image using the self-timer, set the self-timer again.
Capture
(Still
Image/Video)
Advance
Operations
Pressing MENU saves the selected setting,
and the camera exits the Capture Menu
screen.
and the camera exits the Capture Menu
screen.