Hitachi hdc-401ex Manuel D’Utilisation
86
85
Removing the Camera
●
When removing the HDC-401EX, be sure to follow the procedure below. If
the camera is removed or the USB cable is disconnected without following
the specified operation, the computer may not operate correctly or the
recorded data may be damaged.
the camera is removed or the USB cable is disconnected without following
the specified operation, the computer may not operate correctly or the
recorded data may be damaged.
●
This operation is not necessary if your computer is running Windows 98/98SE.
5
5
Close all applications accessing the camera.
1
Click the Remove Hardware icon on the
taskbar, select the drive you want to
remove and then click Stop (Remove).
taskbar, select the drive you want to
remove and then click Stop (Remove).
2
Task bar
〈WindowsMe〉
〈Windows2000〉
〈WindowsXP〉
When Stop (Remove) is clicked, a warning screen may be displayed with the
message Camera cannot be stopped. In this case, check to see if the camera
is still communicating with the computer. Remove the camera once
communication has ended.
message Camera cannot be stopped. In this case, check to see if the camera
is still communicating with the computer. Remove the camera once
communication has ended.
Before removing the camera, be sure to confirm that the camera is not
communicating with the computer (i.e. its viewfinder lamp (red) is not
blinking).
communicating with the computer (i.e. its viewfinder lamp (red) is not
blinking).
When the You can safely remove the device dialog box is
displayed, click OK.
displayed, click OK.
（This step is not necessary in Windows XP.）
3
Remove the camera.
4
Removing
the
Camera
Operations
While
Connected
to
a
a
C
omputer