Integra DBS-30.2 Manuel D’Utilisation
14
EN
CONNECTIONS
Connection to the TV
• Make one of the following connections, depending on the capabilities of your existing device.
AUDIO IN
L
R
VIDEO
IN
HDMI IN
and
or
or
*
1, 2
TV
this unit
standard audio
RCA
audio cable
AUDIO CONNECTION
AUDIO / VIDEO
CONNECTION
HDMI
cable
cable
best audio / picture
Method 3
VIDEO CONNECTION
RCA
video
cable
video
cable
Method 1
standard picture
better picture
HDMI OUT
VIDEO OUTPUT
(COMPONENT)
Method 2 *
1
COMPONENT
VIDEO IN
Y
P
B
P
R
RCA component
video cable
(Red)
(Blue)
(Green)
(Red)
(Blue) (Green)
VIDEO OUTPUT
(VIDEO)
AUDIO OUTPUT
(ANALOG L / R)
*
1
This unit is compatible with the progressive scan system. The feature provides you with the higher quality pictures
than traditional output system does. To utilize this feature, a component or an HDMI connection is required. Refer
to “HDMI Video Resolution” or “Component Output” setting on page 43 to set the video resolution.
than traditional output system does. To utilize this feature, a component or an HDMI connection is required. Refer
to “HDMI Video Resolution” or “Component Output” setting on page 43 to set the video resolution.
*
2
- Analog audio connection is not required for this connection.
- High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for better compatibility.
- Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection.
- High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for better compatibility.
- Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection.
Supplied cables used in this connection are as follows:
• RCA audio cable (L / R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• Connect this unit directly to the TV. If the RCA audio / video cables are connected to a VCR, pictures may be
distorted due to the copy-protection system.
• If the picture is not output properly to the TV because of “HDMI Video Resolution” or “Component Output” setting,
V
press and hold [Play
B] on the front panel for more than 5 seconds. “HDMI Video Resolution” and “Component
Output” setting will be reset to the default automatically. You cannot change the video resolution during Blu-ray
Disc playback. To change the resolution, stop playback.
Disc playback. To change the resolution, stop playback.
• A simple 1-cable connection with a device having an HDMI (High-Definition Multimedia Interface) jack allows
digital transfer of both digital video signals and multi-channel audio signals.
E5SF1UD_DBS30.2_EN_v1.indd 14
E5SF1UD_DBS30.2_EN_v1.indd 14
2010/06/04 11:13:35
2010/06/04 11:13:35