Lexicon BD-30 Manuel D’Utilisation

63

 

 Off (or On if you need 

secondary audio)

 

 

 PCM or DSD (depending on 

your listening preference)

 

Coaxial Optical Output: 

(any – not in use)

 

LPCM Rate Limit: 

(any – not in use)

Also set Speaker Configuration in the “Audio Processing” menu:
•   Set Down Mix to “7.1Ch” or “5.1Ch”.
•    Set the speaker size and subwoofer properly according to your 

actual audio hardware (see page 63).

•    Enable or select the multi-channel analog inputs on your 

receiver.

If your audio connection is as described in “Method 6” on  

page 18 of this guide, and the A/V receiver supports Dolby Digital 

and DTS decoding, the following audio format setup options are 

recommended:
 

 Off (or On if you need 

secondary audio)

 

 

SACD Output: 

 (any – SACD is not available 

through the optical/coaxial 

output)

 

 

 48k (or higher if supported by 

the receiver)

If you primarily listen to stereo contents or your receiver only offers 

stereo audio connections, please use the analog RCA-style cables 

to connect the dedicated Stereo Audio Out of the player to your 

receiver, as described in “Method 7” on page 19 of this guide. The 

following audio format options are recommended:
 

 Off (or On if you need 

secondary audio)

 

 

 PCM or DSD (depending on 

your listening preference)

 

Coaxial Optical Output: 

(any – not in use)

 

LPCM Rate Limit: 

(any – not in use)

The “Audio Processing Setup” section of the Setup Menu system 

allows you to configure how the player will process audio signals 

before sending them to the output.

In the Speaker Configuration menu you can configure speaker 

settings such as down-mix mode, number of speakers, their 

distance, size and trim level. The Speaker Configuration menu 

shows an illustration of the speaker placements to assist you on 

properly configuring the speaker parameters.
Upon entering this menu, the cursor is positioned on the front 

left speaker. You may use the LEFT/RIGHT ARROW buttons to 

Playback Setup

Video Setup

Audio Format Setup

Audio Processing

Device Setup

Network Setup

Exit

Speaker Configuration

Dolby Pro Logic II

Dynamic Range Control

Off

Auto

Setup Menu

Exit

Configure speaker arrangement for the analog audio output