Heath Zenith PF-4300-BK Manuel D’Utilisation
3
598-1169-05
instaLL universaL mounting
Bracket
Estimated Installation Time: 30 minutes
Items needed for installation (not included):
• Phillips and flathead screwdrivers
• Pliers
Items needed for installation (not included):
• Phillips and flathead screwdrivers
• Pliers
• Wire strippers/cutters
• Safety glasses
• Light bulb
• Silicon caulk
For best performance, mount the fixture at least
8 feet (2.4 m) above the ground.
For best performance, mount the fixture at least
8 feet (2.4 m) above the ground.
Fixture Screw (Tightened
Finger Tight)
Finger Tight)
Junction Box
Universal Mounting
Bracket
Bracket
Junction Box Screw
wiring Light Fixture
1. Connect the junction box wires and the fixture
wires together as shown in the following dia-
grams.
grams.
caution: Do not remove wire connec-
tor from reD wire or connect the reD wire
unless you want to control other lights from
this motion sensor fixture.
unless you want to control other lights from
this motion sensor fixture.
Note: If you have a metal junction box use the recom-
mended grounding method shown in the following
illustration. If you are uncertain about the grounding
method, consult your local building code.
mended grounding method shown in the following
illustration. If you are uncertain about the grounding
method, consult your local building code.
2. Twist and secure wires with wire nuts.
Ground Screw
white to white
Black to Black
recommended grounding method
Metal Junction
Box
Box
Pigtail (not
supplied)
supplied)
Fixture Bare
Ground Wire
Ground Wire
Bare Ground Wire
1. Tighten the two fixture screws finger tight.
2. Attach universal mounting bracket to junction
2. Attach universal mounting bracket to junction
box securely with the two screws provided.
warning: turn power off at circuit
breaker or fuse.