SPX Cooling Technologies 98-1514E Manuel D’Utilisation
23
Maintenance
Schedule of Tower Maintenance
Some maintenance procedures may require maintenance personnel to enter
the tower. Each cased face of the tower has a door for access to the interior
of the tower. All AV Series have a 30″ wide by 42″ high door opening.
the tower. Each cased face of the tower has a door for access to the interior
of the tower. All AV Series have a 30″ wide by 42″ high door opening.
The purchaser or owner is responsible for providing a safe method
for entering or exiting the access door. Protective clothing to avoid
cuts from sheet metal should be worn. Wet sheet metal an/or dirt can
be slippery. Nonslip sole shoes should also be worn.
for entering or exiting the access door. Protective clothing to avoid
cuts from sheet metal should be worn. Wet sheet metal an/or dirt can
be slippery. Nonslip sole shoes should also be worn.
Included with this instruction packet are separate User Manuals on each
major operating component of the tower, and it is recommended that you
read them thoroughly. Where discrepancies may exist, the separate User
Manuals will take precedence.
major operating component of the tower, and it is recommended that you
read them thoroughly. Where discrepancies may exist, the separate User
Manuals will take precedence.
The following is recommended as a minimum routine of scheduled main-
tenance:
tenance:
Always shut off electrical power to the tower fan motor prior to
performing any inspections that may involve physical contact with
the mechanical or electrical equipment in or on the tower. Lock out
and tag out any electrical switches to prevent others from turning
the power back on. Service personnel must wear proper personal
protective clothing and equipment.
performing any inspections that may involve physical contact with
the mechanical or electrical equipment in or on the tower. Lock out
and tag out any electrical switches to prevent others from turning
the power back on. Service personnel must wear proper personal
protective clothing and equipment.
Weekly: Inspect for bacterial growth and general operation conditions.
Bacterial growth should be reported to your water treatment expert for
immediate attention.
Bacterial growth should be reported to your water treatment expert for
immediate attention.
Monthly (Weekly at start up): Observe, touch, and listen to the tower.
Become accustomed to its normal appearance, sound, and level of vi-
bration. Abnormal aspects relating to the rotating equipment should be
considered reason to shut down the tower until the problem can be located
and corrected. Observe operation of the motor, sheaves, belt, and fan.
Become familiar with the normal operating temperature of the motor, as
well as the sight and sound of all components as a whole.
Become accustomed to its normal appearance, sound, and level of vi-
bration. Abnormal aspects relating to the rotating equipment should be
considered reason to shut down the tower until the problem can be located
and corrected. Observe operation of the motor, sheaves, belt, and fan.
Become familiar with the normal operating temperature of the motor, as
well as the sight and sound of all components as a whole.
Inspect louvers, drift eliminators and basin trash screens and remove any
debris or scale which may have accumulated. Replace any damaged
debris or scale which may have accumulated. Replace any damaged
Warning
➠