Gianni Industries EB-262 Fascicule
GEM's electric dropbolts can be installed either horizontally
at the top or bottom of the door frame or vertically on the side
of the door frame.
of the door frame.
Fig. A
Horizontal Installation (Frame Header)
Fig. B
Vertical Installation (Side Jamb)
The door locking delay is the time between the door being
closed and the bolt engaging . This can be set to up to 9
seconds at 3 second intervals by adjusting the jumpers.
seconds at 3 second intervals by adjusting the jumpers.
0 seconds
3 seconds
6 seconds
9 seconds
Auto Relocking Timer Setting
The door close sensor can work up to a range of 5mm. If
there is a wide door gap, a sensor magnet within the strike
plate of the door can be adjusted to improve sensor accuracy.
plate of the door can be adjusted to improve sensor accuracy.
45
5 mm maxi
Reed
The brackets UBK-262 are compatible with frameless
glasses doors(Fig. C).
Fig. C
UBK-262
Bracket
For 10 or 12 mm thickness of glass
GIANNI INDUSTRIES, INC.
The products are manufactured under an ISO
9 0 0 1
9 0 0 1
Q C
0 8 0 0 0 0
C e r t i f i e d
Q u a l i t y
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
product quality, performance and commitment
to customer satisfaction.
&
EB-262 Electric Dropbolt
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
Horizontal or vertical installation
Long life solenoids
Adjustable Sensor
Positioning Bolt
Clamp Design
Lock Delay Settings
Optional Accessory
Special designed solenoid for strength and long life
operating lifetime with guaranteed 500,000 operations.
When the bolt is extended to keep the door locked, it draws
only 0.3A in a holding mode down from 0.9A while the bolt is
retracted. This design both protects the power supply and
extends the life of the electric dropbolt.
retracted. This design both protects the power supply and
extends the life of the electric dropbolt.
Pull in
Holding
Current
Draw
(mA)
Time (seconds)
Positioning Bolt is installed to prevent the chance of
locking damage caused by the improper door positioning. It
also helps aligned with door and drop bolt and to reduce the
automatically relock time of dropbolt when door is closed.
also helps aligned with door and drop bolt and to reduce the
automatically relock time of dropbolt when door is closed.
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-EB-262 Ver. E Published on 2008.10.20
DM-CA-EB-262 Ver. E Published on 2008.10.20
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw