Alpine CDA117RI CDA-117RI Manuel D’Utilisation
Codes de produits
CDA-117RI
42
-EN
• The iPhone/iPod is not connected.
– Make sure the iPhone/iPod is correctly connected (refer to
“Connections” on page 47).
Make sure the cable is not bent excessively.
Make sure the cable is not bent excessively.
• There are no songs in the iPhone/iPod.
– Download songs to the iPhone/iPod and connect to this unit.
• Database error or decoder error.
– You can solve the problem by switching the source.
• Communication error or boot error, etc.
– You can solve the problem by reconnecting the iPhone/iPod or
changing source.
• The iPhone/iPod is not verified.
– You can solve the problem by reconnecting the iPhone/iPod.
• Abnormal current is run to the USB connector device.
– You can solve the problem by switching the source.
• A USB device that is not supported by the unit is connected.
– Connect a USB device that is supported by the unit.
Specifications
FM TUNER SECTION
MW TUNER SECTION
LW TUNER SECTION
CD PLAYER SECTION
PICKUP
USB SECTION
* Frequency response may differ depending on the encoder software/bit
rate.
GENERAL
CHASSIS SIZE
NOSEPIECE SIZE
Indication for iPhone/iPod Mode
Tuning Range
87.5-108.0 MHz
Mono Usable Sensitivity
0.7 μV
Alternate Channel Selectivity
80 dB
Signal-to-Noise Ratio
65 dB
Stereo Separation
35 dB
Capture Ratio
2.0 dB
Tuning Range
531-1,602 kHz
Sensitivity (IEC Standard)
25.1 μV/28 dB
Tuning Range
153-281 kHz
Sensitivity (IEC Standard)
31.6 μV/30 dB
Frequency Response
5-20,000 Hz (±1 dB)
Wow & Flutter (% WRMS)
Below measurable limits
Total Harmonic Distortion
0.008% (at 1 kHz)
Dynamic Range
95 dB (at 1 kHz)
Signal-to-Noise Ratio
105 dB
Channel Separation
85 dB (at 1 kHz)
Wave length
795 nm
Laser power
CLASS I
USB requirements
USB 1.1/2.0
Max. Power Consumption
500 mA
USB Class
Mass Storage
File System
FAT 12/16/32
MP3 Decoding
MPEG-1/2 AUDIO Layer-3
WMA Decoding
Windows Media™ Audio
AAC Decoding
AAC-LC format “.m4a” file
Number of Channels
2-Channel (Stereo)
Frequency Response
*
5-20,000 Hz (±1 dB)
Total Harmonic Distortion
0.008% (at 1 kHz)
Dynamic Range
95 dB (at 1 kHz)
Signal-to-Noise Ratio
105 dB
Channel Separation
85 dB (at 1 kHz)
Power Requirement
14.4 V DC
(11-16 V allowable)
(11-16 V allowable)
Maximum Power Output
50 W × 4
Maximum Pre-Output Voltage
4 V/10 k ohms
Weight
1.6 kg (3 lbs. 8 oz)
Width
178 mm (7")
Height
50 mm (2")
Depth
160 mm (6-1/4")
Width
170 mm (6-3/4")