Hearth & Home Technologies II-B Manuel D’Utilisation

Heat & Glo LifeStyle Collection  •  Twilight-II-B  •  2108-900  Rev. G  •  8/07

17

This appliance requires 110-120 VAC be wired to the 
junction box for proper operation of the appliance.

NOTE: This appliance must be electrically wired and grounded 
in accordance with local codes or, in the absence of local 
codes, with National Electric Code ANSI/NFPA 70-latest 
edition or the Canadian Electric Code, CSA C221.1.

Wire 110V to electrical junction box.

Do NOT wire 110V to valve.

Do NOT wire 110V to wall switch.

•  Incorrect wiring will damage millivolt valves.

•  Incorrect wiring will override IPI safety lockout 

and may cause explosion.

•  This appliance may be used with a wall switch, wall 

mounted thermostat and/or a remote control.

•  If using thermostat use one compatible with a millivolt 

gas valve system.

•  Follow parameters for locating thermostat (see individual 

thermostat instructions) to ensure proper operation of 
appliance.

•  Keep wire lengths short as possible by removing any 

excess wire length.

•  Low voltage and 110 VAC voltage cannot be shared 

within the same wall box.

NOTE: Waterproof insulated wire should be used when wiring 
the junction box.

Label all wires prior to disconnection when servicing controls. 
Wiring errors can cause improper and dangerous operation. 
Verify proper operation after servicing.

Shock hazard.

•  Replace damaged wire with type 105

O

 C 

rated wire.

•  Wire must have high temperature insulation.