APC ACPSC2000 Manuel D’Utilisation
15
InRoom SC 60 Hz User Manual
Display Interface
Display Screen Information
Item
Function
Description
1
Sleep mode indicator
Sleep mode is an undercooling mode that is used during times of non-
peak heat. Sleep mode is activated by setting the timer. The set
temperature will automatically increase at intervals until the timer turns
off the Sleep mode.
peak heat. Sleep mode is activated by setting the timer. The set
temperature will automatically increase at intervals until the timer turns
off the Sleep mode.
2
Cool mode indicator
Cool mode cools the room. Temperature and fan speed are set by the user.
3
Fan mode indicator
Fan mode moves air only. The fan speed is set by the user.
4
Dry mode indicator
Dry mode dehumidifies the room. The fan speed is Low only.
5
Set Time
Displays the timer interval (0.5 to 24 hours) and if the timer is on or off.
6
Fan Speed indicator
Bars labeled Low, Medium and High indicate fan speed.
7
Auto mode indicator
In auto mode the microprocessor chooses fan, cool or dry mode
depending on the set temperature setting.
depending on the set temperature setting.
8
Set Temp
Displays the set temperature.
FAN
COOL
SLEEP
SET TEMP
SET TIME
AUTO
LOW MED HIGH
°C
°F
°F
ON
OFF
OFF
DRY
na3360a