Pioneer PDK-TS33A Manuel D’Utilisation

English

Assembling the Stand

Assembly Procedure

Turn the base cover over so the underside is

facing up.

Insert the stand pipes into the base cover.

• Insert stand pipe (R) into the side marked "R" and

stand pipe (L) into the side marked "L".

• Ensure that the open sides of the stand pipes face

inward. Insert the stand pipes, making sure to match
them to the raised portion of the base cover.

Tighten the screws

➀

(4 mm × 10 mm: silver)

to stabilize the stand pipes.

��

�

��

�

��
��

��

��
��

��
��
��
��

��

��
��

��

•

Assemble the stand with a soft sheet placed under the base
cover. If a sheet is not laid before assembly, the front surface
of the base cover may be scratched.

•

Please take care when installing stand pipes (L) and (R) to
ensure that they are in the correct positions. Mistakenly
installing the stand pipes may damage the stand.

After assembling the stand, attach the falling

prevention metal fittings with the installation
screws

➄

(M4 × 35 mm: black).

��

�

��

��
��

��

Be sure not to attach the falling prevention metal fittings in the
reverse position.

��