Pioneer PDK-TS33A Manuel D’Utilisation

English

Preventing Equipment from Falling Over

Stabilizing on a rack etc.

Use screws (those available on the market) to fix the Pioneer
display and television like shown in the diagram.

��

To stabilize the equipment on
a table, use screws that have a
nominal diameter of 4 mm (5/32
inch) and that are at least 20 mm
(13/16 inch) long.

��
��

��

Using a wall for stabilization

Attaching falling prevention bolts (hooks)

to the Pioneer display and television.

Using strong cords to firmly stabilize it

appropriately and firmly to a wall, pillar,

or other sturdy element.

Perform this work in the same way on the left and right
sides.

��

Use hooks, cords, and fittings that
are available on the market.
Recommended hook:
Nominal diameter M8
Length 12 mm to 15 mm (1/2 inch to 5/8 inch)

�

��

�

��

Speciﬁcations

External dimensions:
KRP-TS02 ............. 552 mm (W) × 323 mm (H) × 350 mm (D) (21-23/32 in. (W) × 12-23/32 in. (H) × 13-25/32 in. (D))
PDK-TS33 ............ 550 mm (W) × 402 mm (H) × 349 mm (D) (21-21/32 in. (W) × 15-13/16 in. (H) × 13-3/4 in. (D))
PDK-TS33A .......... 552 mm (W) × 402 mm (H) × 350 mm (D) (21-23/32 in. (W) × 15-13/16 in. (H) × 13-25/32 in. (D))

Weight

KRP-TS02 ............. 2.5 kg (5.6 lbs)
PDK-TS33 ............ 2.2 kg (4.9 lbs)
PDK-TS33A .......... 2.7 kg (6.0 lbs)

• The above specifications and exterior may be modified without prior notice to improve the product.

• After installing the stand, be sure to take special care to ensure that the equipment will not fall over.
• Secure the plasma television to both the rack and the wall surface.