Sony HM-982RW Manuel D’Utilisation
60
Preparation section
Basic section
Application section
Knowledge section
Convenient recording of CD player output
Check the current play mode of the CD player.
Select the recording speed.
3
1
2
Make the preparations for recording.
Select the “CD” input. Be sure to put the CD recorder in stop mode.
Records all tracks in a CD with a simple operation. (All-track recording)
Records a single CD track being played from the beginning. (Single-track recording)
The recording source can be a finalized CD-R/RW, but digital-to-digital recording may not be available with
certain discs.”Digital recording and SCMS”
Records a single CD track being played from the beginning. (Single-track recording)
The recording source can be a finalized CD-R/RW, but digital-to-digital recording may not be available with
certain discs.”Digital recording and SCMS”
A
One-touch edit recording
(O.T.E.) (Norm)
1 Press the MENU key.
÷ When a CD-R/RW is loaded in the CD recorder, the CD-R IN
indicator may blink for a while.
“OPC (Optimum Power Control)”
‡
All track recording
Single-track recording
If it is in play mode, stop it.
Select the desired CD track and play it.
Each press switch the modes as follows.
<High> ............ (Recording at double speed)
<Norm> .......... (Recording at normal speed)
\
\
#
#
MULTI
CONTROL
SET
CD
CDR
=
DIGITAL
The current setting is displayed.
"DIGITAL" is lit ............. Digital-to-digital recording
"DIGITAL" not lit: ......... Analog-to-digital recording
"DIGITAL" is lit ............. Digital-to-digital recording
"DIGITAL" not lit: ......... Analog-to-digital recording
3 Press the MULTI CONTROL keys to select “<Norm>”,
then press the SET key.
\
\
#
#
MULTI
CONTROL
SET
2 Press the MULTI CONTROL keys to select “O.T.E.
Speed ?”, then press the SET key.
MENU
÷ Even when the O.T.E. CD=
=
=
=
=CDR key is pressed in the middle
of a track, recording will start from the beginning of the track.
7
CD
6
When digital-to-digital recording is not impossible
or when analog-to-digital recording is performed,
select the analog input as described in the follow-
ing section then start the setting from step
or when analog-to-digital recording is performed,
select the analog input as described in the follow-
ing section then start the setting from step
1
below.”Changing the recording input setting”
e
Before recording
1 Place a recordable CD-R or CD-RW disc.
fl
2 Load the recording source disc in the CD player.
¢