Honeywell 85-3126 Manuel D’Utilisation

Page de 30
Battery Replacement
The UtilityPRO is shipped from the factory with the coin cell installed. To keep the 
battery from discharging during shipment and storage, the UtilityPRO is shipped 
from the factory with a plastic tab inserted in the battery holder. This tab must be 
removed before the thermostat is mounted on the wall. Simply pull the plastic tab 
out of the thermostat. To replace the battery, remove the battery tray using a screw 
driver. Place a new coin cell (type CR2032 or equivalent) observing the correct 
polarity and push the battery tray into the battery cover assembly.
The UtilityPRO has a coin cell 
battery that retains the time 
and date during a power failure. 
Under normal circumstances the 
coin cell should last five years. 
Should the time and date need 
to be reset after a power failure, 
this is an indication that the coin 
cell needs to be replaced. You 
should replace battery every five 
years, or before leaving home for 
an extended period.
Coin cell 
battery tray
Battery Cover 
Assembly
Insert the coin cell battery in the coin cell battery 
tray and push it inside the battery cover assembly