NAD C545BEE Manuel D’Utilisation
IDENTIFICATION OF CONTROLS
rear panel
1 upgrade port: For future software program updates, use this port
to upgrade the C 545BEE. Owners who register their C 545BEE in our
international website
international website
will be advised of
updates (if any). Your custom installer or dealer can assist you in the
proper upgrade and setup of your C 545BEE.
proper upgrade and setup of your C 545BEE.
2 line out: Connect to the corresponding analog audio input of an
amplifier, receiver or stereo system.
3 digital out (coaxial, optical): The digital playback audio
output signal is available at these ports. Connect the optical or coaxial
digital OUT ports to the corresponding S/PDIF digital input of an
amplifier, receiver, computer soundcard or other digital processors.
digital OUT ports to the corresponding S/PDIF digital input of an
amplifier, receiver, computer soundcard or other digital processors.
4 +12v trigger input: The +12V Trigger input allows the C 545BEE
to be switched remotely from standby mode to ON and vice-versa
by ancillary equipment such as a preamplifier, AV processor, etc. The
controlling device must be equipped with a 12V trigger output to use
this feature.
by ancillary equipment such as a preamplifier, AV processor, etc. The
controlling device must be equipped with a 12V trigger output to use
this feature.
5 ir input: This input is connected to the output of an IR (infrared)
repeater (Xantech or similar) or the IR output of another component to
allow control of the C 545BEE from a remote location.
allow control of the C 545BEE from a remote location.
6 ac mainS input: The C 545BEE comes supplied with a separate AC
Mains cable. Before connecting the cable to a live wall socket ensure
that it is firmly connected to the C 545BEE’s AC Mains input socket first.
Always disconnect the AC Mains cable plug from the live wall socket
first, before disconnecting the cable from the C 545BEE’s Mains input
socket.
that it is firmly connected to the C 545BEE’s AC Mains input socket first.
Always disconnect the AC Mains cable plug from the live wall socket
first, before disconnecting the cable from the C 545BEE’s Mains input
socket.
ATTENTION!
Please make all the connections to your C 545BEE with the unit unplugged. It is also advisable to power down or unplug all associated components while
making or breaking any signal or AC power connections.
making or breaking any signal or AC power connections.
9
EN
G
LI
SH
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ