EAW MQ1394e Fascicule
Frequency Response (1 W @ 1m)
±3 dB
250 Hz to 15 kHz
-10 dB
200 Hz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
Passive
109
MF
112
HF
109
Impedance (Ohms)
Passive
8
MF
8
HF
8
Power Handling, AES Standard (Watts)
Passive
325
MF
400
HF
150
Calculated Maximum Output (dB SPL)
Passive Peak140
MF Peak 144
HF Peak 137
Passive Long Term 134
MF Long Term 138
HF Long Term 131
Nominal Coverage Angle/-6 dB points (degrees)
Horizontal 90
Vertical 40
Recommended High-Pass Frequency
24 dB/Octave 200 Hz
• Dedicated horn loaded MF/HF array module
• 10-in MF w/ Radial Phase Plug™; 2-in exit
• 10-in MF w/ Radial Phase Plug™; 2-in exit
Neodymium HF
• 90° x 40° beamwidth
• Vertically configured to create horizontal arrays
• Vertically configured to create horizontal arrays
A dedicated mid/high system in a vented trapezoidal enclo-
sure. Includes a horn-loaded 10-in MF cone with Radial Phase
Plug™ and a 2-in exit/3-in diaphragm Neodymium compres-
sion driver. The MF and HF horns provide a nominal 90° x 40°
beamwidth. An internal passive crossover with jumpers on the
input panel allows user selection of either bi-amplified or
passive operation. In either case digital signal processing is
required to achieve specified performance. The enclosure
features a comprehensive system of 3/8”-16 threaded sus-
pension points.
sure. Includes a horn-loaded 10-in MF cone with Radial Phase
Plug™ and a 2-in exit/3-in diaphragm Neodymium compres-
sion driver. The MF and HF horns provide a nominal 90° x 40°
beamwidth. An internal passive crossover with jumpers on the
input panel allows user selection of either bi-amplified or
passive operation. In either case digital signal processing is
required to achieve specified performance. The enclosure
features a comprehensive system of 3/8”-16 threaded sus-
pension points.
The MQ1394e employs a no-compromise design where the mid
and high frequency horns are truly large enough to provide
optimal pattern control throughout each passband. The horns
feature a rigid but well-damped construction using wood
veneer backed by structural foam. The MQ1394e has been
designed to work with a complementary MQ1300 Series LF
loudspeaker to create a full-range audio system, but may also
be used without a LF complement for voice-only applications.
The enclosure is vertically configured for arraying in horizon-
tal rows. Horizontal arrays are typically used in venues, such
as houses of worship, where the array must address wide, fan-
shaped audiences.
and high frequency horns are truly large enough to provide
optimal pattern control throughout each passband. The horns
feature a rigid but well-damped construction using wood
veneer backed by structural foam. The MQ1394e has been
designed to work with a complementary MQ1300 Series LF
loudspeaker to create a full-range audio system, but may also
be used without a LF complement for voice-only applications.
The enclosure is vertically configured for arraying in horizon-
tal rows. Horizontal arrays are typically used in venues, such
as houses of worship, where the array must address wide, fan-
shaped audiences.
Application Usage: Install
Houses of Worship
Auditoriums
Theatres
Arenas
Performing Arts Centers
Stadiums
SPECIFICATIONS MQ1394e
FEATURES
DESCRIPTION
PERFORMANCE
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
info@eaw.com
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
MQ1394e/0002680/2 pp April 2002
Printed in USA
APPLICATION
PHYSICAL
Configuration
Mid/High
Powering
Passive or Bi-amplified
MF Subsystem
1 x 10-in horn-loaded cone,
Radial Phase Plug™
Radial Phase Plug™
HF Subsystem
1x 2-in exit/3-in voice coil com-
pression driver on constant
directivity horn
pression driver on constant
directivity horn
Enclosure Materials
Exterior grade Baltic birch plywood
Finish
Wear resistant textured black paint
Connectors
Terminal barrier strip
Suspension Hardware
16x 3/8"-16 threaded mounting
suspension points (4 each top,
bottom and sides)
suspension points (4 each top,
bottom and sides)
Grille
Powder coated perforated steel
Dimensions
inches
millimeters
Height
40.00
1016
Width (front)
32.00
813
Width (rear)
8.12
206
Depth
25.61
650
Trapezoid Angle
25° per side
Weights
pounds
kilograms
Net Weight
148
67.3
Shipping Weight
156
70.9