Philips 37PFL4606H Manuel D’Utilisation

Page de 51
27
English
Change TV preferences
Use the preferences menu to customise your 
TV settings.
1
 Press .
2
 Select 
[Setup] > [TV settings] > 
[Preferences].
3
  Select one of the following, then press OK.
•  [Menu language]: Select a menu 
language.
•  [Sleep timer]: Switch the TV to 
standby after a pre-defined duration.
•  [Location]: Optimise TV settings for 
your location - home or shop.
•  [E-sticker]: (For shop mode only) 
Switch the e-sticker on or off.
•  [Volume bar]: Display the volume bar 
when you change the volume. 
•  [Auto switch off]: To conserve energy, 
set the TV to switch to standby 
automatically after a period of 
inactivity. 
This TV is also designed with other 
energy efficiency settings. If there is 
no user interaction (such as pressing 
a remote control button or a control 
on the front panel) for four hours, 
the TV will automatically switch to 
standby.
•  [Channel information size]: Change 
the type of information that is 
displayed when you switch channels. 
•  [Universal access]: Enable or disable 
the universal access menu.
•  [Key beep]: Enable audio feedback 
when you press buttons on the 
remote control or TV.
•  [Audio out delay]: Automatically sync 
the image on your TV to the audio 
from a connected home theatre.
•  [TV position]: Apply the best settings 
for your TV based on how it is 
mounted.
•  [Teletext 2.5]: Enable or disable 
Teletext 2.5. (For digital TV)
•  [Clock]: Display or remove the time 
from the TV, and set clock options. 
B: Update when prompted through 
digital broadcasts
If you receive digital broadcasts (DVB-T), your 
TV can automatically receive software updates. 
When your TV receives a software update, it 
will prompt you to update the TV software. 
1
 Press .
2
 Select 
[Setup] > [Software settings] > 
[Announcement] .
3
  If a message appears to prompt you 
to update your software, follow the 
instructions to start the update.
 
»
The TV restarts after the software 
update is complete.
4
  If you do not want to update the software, 
select [Setup] > [Software settings] > 
[Clear announcement], then press OK.
Note
 
(see ‘C: Check for updates through digital broadcasts’ 
C: Check for updates through digital 
broadcasts
You can check if there are updates available 
through digital broadcasts. 
1
 Press .
2
 Select 
[Setup] > [Software settings] > 
[Check on major updates].
3
  If an update is available, follow the on-
screen instructions to start the update.
 
»
The TV restarts after the software 
update is complete.
EN