Philips 37PFL4606H Manuel D’Utilisation

Page de 51
38
Hear TV audio through another 
device
If you connect an EasyLink- compliant device 
that has speakers, you can get the most out of 
those speakers if you listen to TV audio through 
them. 
If the connected device is HDMI-ARC 
compliant, and you connect the device through 
an HDMI ARC connector, you can output TV 
audio through the HDMI cable. You will not 
need an additional audio cable.
1
ARC connector (see ‘Back connections’ on 
2
 Press . 
3
 Select 
[Setup] > [TV settings] > 
[EasyLink] > [HDMI1 - audio out], then 
press OK.
4
  Select one of the following, then press OK. 
•  [On]: Hear the TV audio through 
the connected EasyLink device. You 
cannot hear the TV audio through 
the TV speakers or through devices 
connected through the digital audio 
out connector.
•  [Off]: Hear the TV audio through the 
TV speakers, or through a device 
connected through the digital audio 
out connector. 
5
  Control playback with the TV remote 
control play buttons.
Switch all EasyLink devices to standby
To save electricity, you can switch all unused 
EasyLink-compliant devices to standby.
1
  Press the green button. 
2
 Select 
[Switch off unused sources], then 
press OK.
 
»
All connected EasyLink devices are 
switched to standby. 
Select speaker output with Adjust menu
If [EasyLink] or [EasyLink autostart] are 
selected, access the adjust menu to switch the 
TV audio.
1
  While you watch TV, press   ADJUST.
2
 Select 
[Speaker], then press OK.
3
  Select one of the following, then press OK: 
•  [TV]: On by default. Stream TV audio 
through TV and the connected HDMI-
CEC audio device until the connected 
device switches to system audio 
control. TV audio is then streamed 
through the connected device.
•  [Amplifier]: Stream audio through 
the connected HDMI-CEC device. If 
system audio mode is not enabled on 
the device, audio continue to stream 
from the TV speakers. If [EasyLink 
autostart] was enabled, the TV 
prompts the connected device to 
switch to system audio mode.
Maximise display for subtitled video
Some subtitles can create a separate subtitle 
bar under the video, which limits the video 
display area. After you switch on auto subtitle 
shift, the subtitles display over the video image, 
which maximises the video display area. 
1
 Press .
2
 Select 
[Setup] > [TV settings] > 
[EasyLink] > [Auto subtitle shift] > [On], 
then press OK.
Retain picture quality
If your TV picture quality is affected by the 
picture-processing features of other devices, 
switch on Pixel Plus Link.
1
 Press . 
2
 Select 
[Setup] > [TV settings] > 
[EasyLink] > [Pixel Plus Link] > [On], 
then press OK.
EN