Fusion CP-AW2120 Fascicule

PUBLISHED BY FUSION ELECTRONICS LIMITED: © Copyright 2010 by FUSION Electronics Limited. All rights reserved. Specifications and design are subject to change without notice.
YOU CAN HELP PROTECT THE ENVIRONMENT! Please remember to respect the local regulations: Hand in the non-working electrical equipment to an appropriate waste disposal center.

SERIAL NUMBER

DATE OF PURCHASE

AFFIX RECEIPT HERE

WARNING: Audio Systems can produce sound levels over 135dB. Continuous exposure to sound pressure levels over 100dB may cause permanent
hearing loss! Please watch for emergency vehicles as warning signals may not be heard. USE COMMON SENSE!

For further product and installation information, please visit www.fusionelectronics.com
Pour plus d’informations sur les produits et l’installation, rendez-vous sur www.fusionelectronics.com
Para obtener más información acerca de los productos y de su instalación, visite el sitio web www.fusionelectronics.com
Bezoek www.fusionelectronics.com voor meer product- en installatie-informatie.
Weitere Produkt- und Installationsinformationen finden Sie unter www.fusionelectronics.com
Per ulteriori informazioni sui prodotti e la loro installazione, potete visitare www.fusionelectronics.com
Для получения дополнительной информации о продуктах и установке зайдите, пожалуйста, на:  www.fusionelectronics.com

Note 1 
Take care to make sure the wires
are spliced in the correct phase.
Positive to positive, negative to
negative. Failure to do this correctly
could result in loss of bass.

See Note 1
Splice into source
unit’s speaker wires
(R+) Grey/White
(R- ) Grey
(L+) Green/White
(L-) Green

Connect the remote
level controller lead to
the amplifier

Connect red wire
to positive (+12V)
battery terminal

Connect blue wire to source unit’s
accessory lead or switched 12 volt
source (REM)

Connect black wire
to chassis ground
of vehicle (Ground)