Fujifilm FinePix HS10 04003419 Manuel D’Utilisation

Codes de produits
04003419
Page de 151
117
Troubleshooting
Power and Battery
Problem
Problem
Possible cause
Possible cause
Solution
Solution
Page
Page
The camera does 
not turn on.
The batteries are exhausted.
Insert fresh or fully-charged spare batteries.
8
The batteries are not in the correct orientation. Re-insert the batteries in the correct orientation.
8
The battery-chamber cover is not latched.
Latch the battery-chamber cover.
9
The AC power adapter and DC coupler are not 
connected properly.
Make sure that the AC power adapter and DC coupler 
are properly connected.
The batteries and the AC power adapter have 
been disconnected for some time.
After inserting batteries or connecting the AC power 
adapter, wait a few seconds before turning the camera 
on.
The batteries run 
down quickly.
The batteries are cold.
Warm the batteries by placing them in a pocket or other 
warm place and re-insert them in the camera immedi-
ately before taking a picture.
vi
There is dirt on the battery terminals.
Clean the terminals with a soft, dry cloth.
The camera is in 
M
 mode.
Select another shooting mode. 
21
The batteries are new, have been left unused 
for an extended period, or have been recharged 
without fi rst being fully discharged (recharge-
able Ni-MH batteries only).
Discharge Ni-MH batteries using the 
P
 DISCHARGE 
option and recharge them in a battery charger (sold 
separately).  If the batteries do not hold a charge after re-
peated discharging and recharging, they have reached 
the end of their service life and must be replaced.
113
E
 HIGH-SPEED SHOOTING is on.
Turn 
E
 HIGH-SPEED SHOOTING off  to reduce the 
drain on the battery.
91
J is selected for focus mode.
Select a diff erent focus mode.
51
The camera turns 
off  suddenly.
The batteries are exhausted.
Insert fresh or fully-charged spare batteries.
8
The AC adapter or DC coupler has been discon-
nected.
Make sure that the AC adapter and DC coupler are prop-
erly connected.
Tr
o
u
b
le
sh
o
o
ti
n
g