Lucent Technologies Release 6 Manuel D’Utilisation
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Install and Wire Telephones and Other Equipment
Page 5-27
TN1654 DS1 Converter (Release 6r Only)
5
Channel Service Unit Cabling
Figure 5-13
shows a typical connection from the H600-348 Quad Cable to the
CSU, through the H600-307 Network Cable, and to the network interface through
the Smart Jacks. The double-headed cable plugs into the DS1 converter slot.
The quad cable provides up to 4 DS1 connections using a 15-pin connector that
plugs into the DTE jack on each CSU. An adapter cable (comcode 107063711)
may be required to connect the H600-348 and the H600-307 cables to the CSU.
the Smart Jacks. The double-headed cable plugs into the DS1 converter slot.
The quad cable provides up to 4 DS1 connections using a 15-pin connector that
plugs into the DTE jack on each CSU. An adapter cable (comcode 107063711)
may be required to connect the H600-348 and the H600-307 cables to the CSU.
Figure 5-13.
DS1 Converter Connections — Part 2
Figure Notes
1. H600-348 Quad Cable
2. 15-Pin Male “D” Connectors (to DTE Jacks
on CSU)
3. Channel Service Unit (CSU)
4. H600-307 Cable (RJ-48C to RJ-48C)
5. Network Interface
6. Smart Jack
7. Cable “A”
8. Cable “B”
9. Cable “C”
10. Cable “D”
3150csu RBP 062696
POWER
AUX PORT COM PORT
MODEM
DTE
NETWORK
POWER
AUX PORT COM PORT
MODEM
DTE
NETWORK
POWER
AUX PORT COM PORT
MODEM
DTE
NETWORK
POWER
AUX PORT COM PORT
MODEM
DTE
NETWORK