Jonsered FC 2145S Manuel D’Utilisation

English

 – 21

If the machine is fitted with a decompression valve (A): Press 
the valve to reduce the pressure in the cylinder and make 
starting easier. You should always use the decompression 
valve when starting the machine. Once the machine has 
started the valve will automatically return to its original 
setting.

Hold the body of the machine on the ground using your left 
hand (CAUTION! Not with your foot!). Grip the starter handle, 
slowly pull out the cord with your right hand until you feel 
some resistance (the starter pawls grip), now quickly and 
powerfully pull the cord.

Repeat pulling the cord until the engine starts. When the 
engine starts. return choke control to run position and apply 
full throttle; the throttle will automatically disengage from the 
start setting. Never wrap the starter cord around your 
hand

CAUTION! Do not pull the starter cord all the way out and do 
not let go of the starter handle when the cord is fully extended. 
This can damage the machine.

Stop the engine by switching off the ignition.