Jonsered FC 2145S Manuel D’Utilisation

24 – 

English

•

Thin stems and brush are mown down. Work with a 
sawing movement, swinging sideways.

•

Try to cut several stems in a single sawing movement.

•

With groups of hardwood stems, first clear around the 
group. Start by cutting the stems high up around the 
outside of the group to avoid jamming. Then cut the stems 
to the required height. Now try to reach in with the blade 
and cut from the centre of the group. If it is still difficult to 
gain access, cut the stems high up and let them fall. This 
will reduce the risk of jamming.

•

Grass blades and grass cutters must not be used on 
woody stems.

•

A grass blade is used for all types of tall or coarse grass.

•

The grass is cut down with a sideways, swinging 
movement, where the movement from right-to-left is the 
clearing stroke and the movement from left-to-right is the 
return stroke. Let the left-hand side of the blade (between 
8 and 12 o’clock) do the cutting.

•

If the blade is angled to the left when clearing grass, the 
grass will collect in a line, which makes it easier to collect, 
e.g. by raking.

•

Try to work rhythmically. Stand firmly with your feet apart. 
Move forward after the return stroke and stand firmly 
again.

•

Let the support cup rest lightly against the ground. It is 
used to protect the blade from hitting the ground.

•

Reduce the risk of material wrapping around the blade by 
following these instructions: 

1

Always work at full throttle.

2

Avoid the previously cut material during the return 
stroke.

•

Stop the engine, unclip the harness and place the 
machine on the ground before you start to collect the cut 
material.