Stow MS-40H Manuel D’Utilisation
STOW MS-40H HYDRAULIC MIXER — PARTS & OPERATION MANUAL — REV. #1 (05/17/02) — PAGE 11
MS-40H HYDRAULIC MIXER — CONTROLS
Safety Grill — Provided for operator safety. This safety grill is
designed to keep hands and solid objects out of the mixing
drum when in use. This grill should be closed at all times when
mixer is in use. DO NOT remove the grill or grill opening bar.
Keep the grill clean by washing it down daily.
designed to keep hands and solid objects out of the mixing
drum when in use. This grill should be closed at all times when
mixer is in use. DO NOT remove the grill or grill opening bar.
Keep the grill clean by washing it down daily.
Bag Cutter— This feature allows compound mixing bags to be
opened easily, therefore allowing the contents of the bag to fall
directly into the mixing drum.
opened easily, therefore allowing the contents of the bag to fall
directly into the mixing drum.
Mixing Paddles — Used in the mixing of material. This unit
uses four different types of paddles to provide a fast uniform
mix.
uses four different types of paddles to provide a fast uniform
mix.
Manual Dump Handle — Pull this handle downward to dump
the contents of the drum. Push the handle upward to return the
drum to its vertical position.
the contents of the drum. Push the handle upward to return the
drum to its vertical position.
Hydraulic Dump Lever (Option) — Pull lever OUT toward
the engine to engage. Once lever is engaged tub (drum) will
automatically discharge material. push lever IN to return mix
position.
the engine to engage. Once lever is engaged tub (drum) will
automatically discharge material. push lever IN to return mix
position.
Blade Control Lever — Pull lever OUT to mix material, place
lever in CENTER position (neutral) for no mixing, push lever
IN to reverse blade direction.
lever in CENTER position (neutral) for no mixing, push lever
IN to reverse blade direction.
Mixing Drum — Made of
steel. Mixing materials such as
concrete, mortar, plaster are to be placed into this drum for
mixing. Always clean the drum after each use.
mixing. Always clean the drum after each use.
Tow Bar — When towing is required, connect tow bar to a
vehicle. Reference page 13.
vehicle. Reference page 13.
Engine Cover — Lift this cover to gain access to the engine
compartment.
compartment.
ON/OFF Switch (gasoline) — This switch is provided on
mixers
with gasoline engines only and is located on the side of the
engine cover. When activated it will shut down the engine.
engine cover. When activated it will shut down the engine.
ON/OFF Switch (electric) — This switch is provided on mixers
with electric motors. To gain access to this switch, lift the engine
cover. When activated it will shut down the electric motor.
with electric motors. To gain access to this switch, lift the engine
cover. When activated it will shut down the electric motor.
Blade Engagement Lever — Push the lever in, toward the
engine to engage. Once lever is engaged paddle shaft will
rotate. To disengage pull the lever backwards.
engine to engage. Once lever is engaged paddle shaft will
rotate. To disengage pull the lever backwards.
Zerk Fitting — There is, on each end of the mixing drum a zerk
grease fitting. These fittings lubricate the dumping mechanism.
Lubricate both fittings at least twice a week.
grease fitting. These fittings lubricate the dumping mechanism.
Lubricate both fittings at least twice a week.
Oil Sight Glass — Indicates the level of the hydraulic oil in the
reservoir. Oil should be visible within 3/4 height of sight glass.
reservoir. Oil should be visible within 3/4 height of sight glass.
Figure 1. Mixer