Pentax R-315(N) Manuel D’Utilisation
7 CORRECTION MODE
7-1
Changing the Target Constant
Changing the Target Constant can be performed only when the Reflector sheet
and Prism Constant settings are “INPUT” in Initial Setting 1.
and Prism Constant settings are “INPUT” in Initial Setting 1.
Example: Prism Constant - 25mm setting
Press [F4] [CORR] in mode B.
(If the instrument is in mode A, press [F5]
[MODE] to enter mode B.)
(SHEET CONST : Reflector sheet constant)
(If the instrument is in mode A, press [F5]
[MODE] to enter mode B.)
(SHEET CONST : Reflector sheet constant)
Press the [F5] [SELECT] to enable the Prism
Constant to be changed.
Constant to be changed.
Clear the exiting values by pressing [CLEAR] key.
Input 25 by pressing the numeric keys.
Input 25 by pressing the numeric keys.
46
7 CORRECTION MODE
SELECT
CORRECTION
1.PRISM CONST : -30mm
2.SHEET CONST
2.SHEET CONST
0mm
3.TEMP
15
°
C
4.PRESS
1013hPa
5.ppm
0ppm
CORRECTION
1.PRISM CONST : -30mm
2.SHEET CONST 0mm
3.TEMP
2.SHEET CONST 0mm
3.TEMP
15
°
C
4.PRESS
1013hPa
5.ppm
0ppm
CLEAR
PENTAX R-300 (p20-52) 10/30/02 11:08 AM Page 46