Muratec MFX-1350 Manuel D’Utilisation

12-14 M

aIntenance

 & p

robLeM

 

soLvInG

Occasionally, your machine encounters some trouble transmitting or receiving docu-

ments. When it does, it alerts you with an alarm. You can identify the problem with LCD

 

messages and printed check messages.

All Commands In Use

Your machine has all of its 99 possible delayed commands (automatic redialing counts 

as one) stored in memory and cannot accept another.

Wait until your machine has completed one of the delayed commands or delete an exist-

ing command (see “Reviewing or canceling commands” on page 4-8).

Already Stored

You tried to enter the same fax (or phone) number already entered in your machine.

Enter a different fax (or phone) number.

Box In Use

You tried to erase a F-code box which contains at least one document.

Erase the document(s), then try again.

Call For Service

The scanner lamp is dim or not operating.

Make repeated copies to help evaporate any internal moisture. If that doesn’t resolve 

the problem, contact your Muratec dealer.

Check Paper Size

Open&CloseFrontCover

The loaded paper does not match the paper registered in the machine.

Set correct sized paper or change the paper size setting (see page 2-16).

Open and close the front cover to reset the printer.

Close XXX Cover

The cover indicated on the LCD is open or has not been closed securely. Close it properly.

Close XXX Cassette

The paper cassette indicated on the LCD is open or has not been closed securely. Close 

it properly.

Communication Error

A communication error disrupted the reception or transmission.  If you were transmit-

ting, press <Stop> to clear the error message and then re-try the transmission. If you 

were receiving a fax, try to contact the other person and have him/her re-try the trans-

mission. (The problem may be entirely with his/her machine, phone line, etc.)

Copy Off

The copy protection feature is on. Turn off the copy protection (see page 9-13).

Document Full

You tried to enter a document into the F-code box, but the machine has reached its 

capacity (30 documents). Delete unnecessary documents stored in the F-code boxes or 

use other F-code box.

Document Jam

ContStor Enter/Cancl

A document jams while you are using the ADF. See pages 12-8 to 12-10 for clearing the 

document jam.

Document Stored

You tried to erase a batch box which contains at least one document.  To erase a batch 

box, erase all the documents stored in the box.

Drum Near End

Your  drum  will  need  to  be  replaced  soon.    Please  contact  your  Muratec  dealer  to 
purchase a new drum cartridge.

Enter No. (00-32)

You tried to enter a call group number that exceeds 32. Your machine can maintain 32 

call groups, numbered 1–32 (call group 0 covers all the groups).  Enter the correct call 

group identifier number.

Enter Reduce/Enlarge

You tried to copy your document on the paper other than Letter, Half-letter  or Legal 

size using the bypass tray, or the calculated zoom ratio is out of the acceptable range (25 

– 400 %).

Enter the zoom ratio manually although a part of the image might be lacked, or change 

the paper for copying.

Enter Scan Size

When you using the document glass*, you must manually enter the scan size of your 

document.  Press <Doc. Size> to choose the size.

Feeder In Use

The command you are trying to enter requires the use of the ADF, which is already in 

use.  Wait for the machine to stop using the ADF, then try again. 

Hang Up Phone

The external telephone is not settled completely on its cradle.

* The document glass is available only for the MFX-1350/MFX-1330.