Ricoh 1008 Manuel D’Utilisation

Remove the toner cassette from the

vinyl bag.

l 

Keep the vinyl bag for repacking.

Rock the toner cassette back and

forth five or six times.

Set the toner cassette on a flat
surface and remove the two tapes

inside the unit completely as

shown.

l 

Hold the toner cassette firmly with one

hand to prevent it from turning over.

l 

Yellow marks appear at the end of the

tapes. Make sure to remove the tapes
completely from the toner cassette.

 If these tapes are not removed,

the toner cassette may be damaged, and
unable to make a copy.

Open the top unit.

Confirm that the A mark   of the

toner cassette is pointing upward.

Align guides on both sides of the toner
cassette with the left (with 

l 

mark)

and right (with   mark) guides   of

the toner cassette holder, then insert

the toner cassette into the copier as

shown until it clicks into place.

l 

Do not insert the toner cassette into the

copier until the tapes are completely

removed.

Close the top unit by pressing

down firmly on the marked posi-

tion.

Attention: Make sure to press the marked

position.

16