Samsung SAMTRON 78E Manuel D’Utilisation
Before calling for service, check the information in this section to see if you can remedy any
problems yourself. If you do need assistance, please call
problems yourself. If you do need assistance, please call
the phone number on the
Information section or contact your dealer
.
Symptom
Check List
Solutions
No images on the
screen. I cannot turn
on the monitor.
screen. I cannot turn
on the monitor.
Is the power cord connected
properly?
properly?
Check the power cord connection
and supply.
and supply.
Can you see "
" on the
screen?
Check the signal cable connection.
If the power is on, reboot the
computer to see the initial screen
(the login screen), which can be
seen.
computer to see the initial screen
(the login screen), which can be
seen.
If the initial screen (the login screen)
appears, boot the computer in the
applicable mode (the safe mode for
Windows ME/XP/2000) and then
change the frequency of the video
card.
(Refer to the
appears, boot the computer in the
applicable mode (the safe mode for
Windows ME/XP/2000) and then
change the frequency of the video
card.
(Refer to the
Preset Timing Modes
)
Note: If the initial screen (the login
screen) does not appear,
screen) does not appear,
contact
the Service Center or your dealer
.
Can you see "
" on the
screen?
You can see this message when the
signal from the video card exceeds
the maximum resolution and
frequency that the monitor can
handle properly.
Adjust the maximum resolution and
frequency that the monitor can
handle properly.
signal from the video card exceeds
the maximum resolution and
frequency that the monitor can
handle properly.
Adjust the maximum resolution and
frequency that the monitor can
handle properly.
There is no image on the screen.
Is the power indicator on the
monitor blinking at 1 second
intervals?
Is the power indicator on the
monitor blinking at 1 second
intervals?
The monitor is in PowerSaver mode.
press any key on the keyboard to
activate the monitor and restore the
image on the screen.
press any key on the keyboard to
activate the monitor and restore the
image on the screen.
The image on the
screen is shaking.
screen is shaking.
Check the monitor configuration
to see if it is in Interlace Mode.
(Interlace Mode: Vertical
frequency 43Hz, 87Hz(i), etc)
to see if it is in Interlace Mode.
(Interlace Mode: Vertical
frequency 43Hz, 87Hz(i), etc)
The signal from the video card
exceeds the maximum resolution and
frequency of the monitor.
exceeds the maximum resolution and
frequency of the monitor.
Are there any magnetic products
such as a power adapter,
such as a power adapter,
Move the monitor away from anything
that can create a strong magnetic field.
that can create a strong magnetic field.