Hitachi HTS541616J9SA00 Manuel D’Utilisation

Page de 167
Travelstar 5K160 (SATA) Hard Disk Drive Specification 
 
58/167 
 
Figure 13 Password Lost   
12.9.1.4 Attempt limit for SECURITY UNLOCK command   
The SECURITY UNLOCK command has an attempt limit. The purpose of this attempt limit is to 
prevent that someone attempts to unlock the drive by using various passwords many times.   
The device counts the password mismatch. If the password does not match, the device counts it up 
without distinguishing the Master password and the User password. If the count reaches 5, EXPIRE 
bit(bit 4) of Word 128 in Identify Device information is set, and then SECURITY ERASE UNIT 
command and SECURITY UNLOCK command are aborted until a power off. The count and EXPIRE 
bit are cleared after a power on reset.   
12.9.6 
Command Table   
This table shows the device’s response to commands when the Security Mode Feature Set (Device 
lock function) is enabled.   
Command Device 
Locked 
Mode 
Device 
Unlock 
Mode 
Device 
Frozen 
Mode 
Check 
Power 
Mode 
o o o 
Device Configuration RESTORE 
Device Configuration FREEZE LOCK 
Device Configuration IDENTIFY 
Device Configuration SET 
Execute Device Diagnostic 
Flush 
Cache 
 
x o o 
Flush Cache Ext 
Format 
Track 
x o o 
Format 
Unit 
x o o 
Identify 
Device 
o o o 
Idle 
o o o 
Idle 
Immediate 
o o o 
Initialize 
Device 
Parameters 
o o o 
Read 
Buffer 
o o o 
Read 
DMA 
 
x o o 
Read 
DMA 
Ext 
x o o