Intel SOM-4486 Manuel D’Utilisation
15
Chapter 3
1. Apply power to the SOM-4486 application with a color TFT dis-
play attached. This is the default setting for the SOM-4486 series.
Make sure that the AWDFLASH.EXE and *.BIN files are located
in the working drive.
Make sure that the AWDFLASH.EXE and *.BIN files are located
in the working drive.
Note:
Make sure that you do not run AWDFLASH.EXE
while your system is operating in EMM386 mode.
while your system is operating in EMM386 mode.
2.
At the prompt, type AWDFLASH.EXE and press <Enter>. The
VGA configuration program will then display the following:
Figure 3.1: BIOS VGA setup screen
3. At the prompt, type in the BIN file which supports your display.
When you are sure that you have entered the file name correctly
press <Enter>. The screen will ask “Do you want to save?” If you
wish to continue press Y. If you change your mind or have made a
mistake press N.
press <Enter>. The screen will ask “Do you want to save?” If you
wish to continue press Y. If you change your mind or have made a
mistake press N.
4. If you decide to continue, the screen will issue a prompt which will
then ask “Are you sure to program (Y/N)?” If you wish to con-
tinue, press Y. Press N to exit the program.
tinue, press Y. Press N to exit the program.