Intel SOM-4486 Manuel D’Utilisation

The SOM-4486 is equipped with a high-performance 32-bit Ethernet 
chipset which is fully compliant with IEEE 802.3 100 Mbps CSMA/CD 
standards. It is supported by major network operating systems. It is also 
both 100Base-T and 10Base-T compatible.

•  Intel 82562EZ 10/100Base-T Ethernet LAN controller
•  Optional Intel 82540 10/100/1000 Base-T Ethernet LAN controller
•  Supports Wake-on-LAN remote control function.
•  PCI Bus Master complies with PCI Rev. 2.2
•  Complies with 100Base-TX, and 10Base-T applications.
•  Single RJ-45 connector gives auto-detection of 10 Mbps or 100 Mbps 

network data transfer rates and connected cable types.

•  Enhancements on ACPI & APM.
•  Complies with PCI Bus Power Management Interface Rev. 1.1,
•  ACPI Rev. 2.0, and Device Class Power Management Rev. 1.0.

Before installing the Ethernet driver, note the procedures below. You 
must know which operating system you are using in your SOM-4486, and 
then refer to the corresponding installation procedure. Then just follow 
the steps described. You will quickly and successfully complete the 
installation, even if you are not familiar with instructions for Windows.
.