Intel PCM-9387 Manuel D’Utilisation
PCM-9387 User’s Manual
92
Appendix D AT/ATX Power setting
D.1 Introduction
PCM-9387 supports 2 kinds of power mode to boot up system. One is
ATX mode, the other is AT mode. ATX should connect standby power
and power supply on# signal to turn on main power supply. AT power
doesnít have those two pins and the pin 6 of PCM-9387 power connector
(CN3) needs to be connected to 5 voltage for properly boot up.
The power connector table & Power supply diagram tables are as bellow:
ATX mode, the other is AT mode. ATX should connect standby power
and power supply on# signal to turn on main power supply. AT power
doesnít have those two pins and the pin 6 of PCM-9387 power connector
(CN3) needs to be connected to 5 voltage for properly boot up.
The power connector table & Power supply diagram tables are as bellow:
Table D.1: Power Connector
Power Connector (CN3) Power Type : ATX
Power Type : AT
Pin 1: GND
GND
GND
Pin 2: GND
GND
GND
Pin 3: VCC
+5V
+5V
Pin 4: GND
GND
GND
Pin 5: VCC
+5V
+5V
Pin 6:VCCSB
Standby +5V
+5V
Pin 7: GND
GND
GND
Pin 8: PWR_PSON#
PWR_PSON#
NC
Pin 9: VCC
+5V
+5V
Pin 10: GND
GND
GND
Pin 11: VCC
+5V
+5V
Pin 12: +12V
+12V(Optional)
+12V(Optional)