Intel PCM-9387 Manuel D’Utilisation
PCM-9387 User’s Manual
18
2.12 Audio interfaces (CN2)
2.12.1 Audio connector (CN2)
The board provides all major audio signals on a 10-pin cable connector,
These audio signals include Microphone in (mono), Line in (stereo) and
Line out (stereo).
These audio signals include Microphone in (mono), Line in (stereo) and
Line out (stereo).
2.13 COM port connector (CN8,CN19)
The PCM-9387 provides two serial ports (COM1: RS-232; COM2: RS-
232/422/485) in one DB-9 connector (COM1) and one 14-pin dual-inline,
male header. It provides connections for serial devices (a mouse, etc.) or a
communication network. You can find the pin assignments for the COM
port connector in Appendix C.
232/422/485) in one DB-9 connector (COM1) and one 14-pin dual-inline,
male header. It provides connections for serial devices (a mouse, etc.) or a
communication network. You can find the pin assignments for the COM
port connector in Appendix C.
2.13.1 COM2 RS-232/422/485 setting (J2)
COM2 can be configured to operate in RS-232, RS-422, or RS-485 mode.
This is done via J2
This is done via J2
2.14 VGA/LCD/LVDS interface connections
The board’s PCI SVGA interface can drive conventional CRT displays
and is capable of driving a wide range of flat panel displays, including
passive LCD and active LCD displays. The board has three connectors to
support these displays: one for standard CRT VGA monitors, one for flat
panel displays, and one for LVDS type LCD panels.
and is capable of driving a wide range of flat panel displays, including
passive LCD and active LCD displays. The board has three connectors to
support these displays: one for standard CRT VGA monitors, one for flat
panel displays, and one for LVDS type LCD panels.
2.14.1 CRT display connector (CN18)
The CRT display connector is a 15-pin D-SUB connector used for con-
ventional CRT displays.
ventional CRT displays.
2.14.2 LVDS LCD panel connector (CN1)
Table 2.9: J2: COM2 Setting
Setting
Function
1-2
RS-232
3-4
RS-485
5-6
RS-422