Intel PCM-9387 Manuel D’Utilisation

Select Enabled if your system contains a Universal Serial Bus (USB) con-
troller and you have USB peripherals. The choices: Enabled, Disabled.

Select Enabled if user plan to use an USB keyboard.  The choice: 
Enabled, Disable.

Select Disable if you do not want to use AC-97 audio.   Option is Auto, 
Disable.

This item allows you to choose which one to activate first, PCI Slot or on-
chip VGA. The choices: PCI Slot, Onboard.

Option is Enable and Disable.   Select Disable if user does not want to use 
onboard LAN controller1

You can enable the Primary IDE channel and/or the Secondary IDE chan-
nel. Any channel not enabled is disabled. This field is for systems with 
only SCSI drives.

When enabled, this field allows you to connect your floppy disk drives to 
the onboard floppy disk drive connector instead of a separate controller 
card. If you want to use a different controller card to connect the floppy 
disk drives, set this field to Disabled.

For settings reference the Appendix for the serial resource allocation,
and Disabled for the on-board serial connector

This item allows you to select UART mode. The choices: IrDA, ASKIR, 
Normal.

This item allows you to determine the active of RxD, TxD. The Choices: 
“Hi, Hi,” “Lo, Lo,” “Lo, Hi,” “Hi, Lo.”

This item allows you to enable/disable IR transmission delay. The 
choices: Enabled, Disabled.